Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: a review
Additive manufacturing (AM) technologies are currently employed for the manufacturing of
completely functional parts and have gained the attention of high-technology industries such …
completely functional parts and have gained the attention of high-technology industries such …
Research advances of stainless-clad bimetallic steel structures
H BAN, Y MEI, Y SHI - 工程力学, 2021 - engineeringmechanics.cn
The stainless-clad (SC) bimetallic steel combines the excellent corrosion resistance of
stainless steel with the high strength and low cost of conventional mild (CM) steel. It …
stainless steel with the high strength and low cost of conventional mild (CM) steel. It …
Drastic improvement in mechanical properties and weldability of 316L stainless steel weld joints by using electromagnetic vibration during GTAW process
M Sabzi, SM Dezfuli - Journal of Manufacturing Processes, 2018 - Elsevier
In this study, the influence of applying electromagnetic vibration during welding on the
microstructural transformations, mechanical properties, and hot-cracking susceptibility in …
microstructural transformations, mechanical properties, and hot-cracking susceptibility in …
[HTML][HTML] 不锈钢复合钢材钢结构研究进展
班慧勇, 梅镱潇, 石永久 - 工程力学, 2021 - pubs.cstam.org.cn
不锈钢复合钢材兼具不锈钢优良的耐腐蚀性能和传统结构钢材的高强度, 低成本特点,
应用于钢结构工程中具有综合力学性能更优, 施工简单周期更短, 设计使用年限更长 …
应用于钢结构工程中具有综合力学性能更优, 施工简单周期更短, 设计使用年限更长 …
Cladding of low-carbon steel to austenitic stainless steel by hot-roll bonding: microstructure and mechanical properties before and after welding
Z Dhib, N Guermazi, M Gaspérini, N Haddar - Materials Science and …, 2016 - Elsevier
The aim of this contribution was to study the performance of cladded low-carbon steel
(ASTM A283 Grade C) to austenitic stainless steel (ASTM A240 type 316/AISI 316) using hot …
(ASTM A283 Grade C) to austenitic stainless steel (ASTM A240 type 316/AISI 316) using hot …
Influences of depositing materials, processing parameters and heating conditions on material characteristics of laser-cladded hypereutectoid rails
Q Lai, R Abrahams, W Yan, C Qiu, P Mutton… - Journal of Materials …, 2019 - Elsevier
The effects of different cladding materials, processing parameters and heating regimes on
the underlying microstructural features and mechanical properties of laser-cladded premium …
the underlying microstructural features and mechanical properties of laser-cladded premium …
Influence of multi-layer laser cladding depositions and rail curvature on residual stress in light rail components
O Kendall, R Abrahams, A Paradowska, M Reid… - Engineering Failure …, 2023 - Elsevier
Rapid deterioration of critical rail components due to wear and fatigue is a significant
challenge faced by the railway industry. Laser cladding has been applied to straight and …
challenge faced by the railway industry. Laser cladding has been applied to straight and …
Unusual interface phase transformation during continuous additive manufacturing of maraging steel and Co–30Cr–7Mo alloy
The high strength and hardness of maraging steel (MS1) can be functionally integrated with
the thermal stability and toughness of Co–30Cr–7Mo alloy (MP1) through multi-material …
the thermal stability and toughness of Co–30Cr–7Mo alloy (MP1) through multi-material …
Stellite alloy mixture hardfacing via laser cladding for control valve seat sealing surfaces
Y Ding, R Liu, J Yao, Q Zhang, L Wang - Surface and Coatings Technology, 2017 - Elsevier
A Stellite alloy mixture hardfacing consisting of 70% Stellite 3 and 30% Stellite 21, is created
via laser cladding for control valve seat sealing surfaces, aiming at enhancing hardness and …
via laser cladding for control valve seat sealing surfaces, aiming at enhancing hardness and …
The effect of repeated repair welding on mechanical and corrosion properties of stainless steel 316L
The purpose of this study is to evaluate changes in the mechanical, micro structural and the
corrosion properties of stainless steel 316L under repeated repair welding. The welding and …
corrosion properties of stainless steel 316L under repeated repair welding. The welding and …