Seismic collapse probability and life cycle cost assessment of isolated structures subjected to pounding with smart hybrid isolation system using a modified fuzzy …
A Rayegani, G Nouri - Structures, 2022 - Elsevier
The possibility of pounding on isolated structures with surrounding moat walls is one of the
concerns in the design of isolation systems, especially in pulse-type near-field earthquakes …
concerns in the design of isolation systems, especially in pulse-type near-field earthquakes …
Effects of near‐fault acceleration and non‐acceleration pulses on pounding between in‐plan irregular fixed‐base and base‐isolated buildings
F Mazza, R Labernarda - Structural Control and Health …, 2022 - Wiley Online Library
Concave surface sliders (CSSs) are considered as an effective solution for retrofitting
adjacent buildings irregular in plan that could undergo significant seismic pounding due to …
adjacent buildings irregular in plan that could undergo significant seismic pounding due to …
Jerk in earthquake engineering: State-of-the-art
V Vukobratović, S Ruggieri - Buildings, 2022 - mdpi.com
The time derivative of acceleration, termed jerk, represents a physical property reflected
through a sudden change of acceleration, and is expressed in m/s3. Since jerk is felt by …
through a sudden change of acceleration, and is expressed in m/s3. Since jerk is felt by …
Experimental shake table validation of damping behaviour in inerter-based dampers
Inerter-based-dampers have received substantial interest from the earthquake engineering
community in the last two decades. These typically consist of an inerter, a linear spring and a …
community in the last two decades. These typically consist of an inerter, a linear spring and a …
Implications of inter-storey-isolation (ISI) on seismic fragility, loss and resilience of buildings subjected to near fault ground motions
Seismic fragility, loss and resilience provide a rational basis for decision making in new
construction/retrofitting. The inter-storey-isolation (ISI) is a relatively recent seismic vibration …
construction/retrofitting. The inter-storey-isolation (ISI) is a relatively recent seismic vibration …
[PDF][PDF] Seismic performance of a building base-isolated by TFP susceptible to pound with a surrounding moat wall
Limiting the displacement of seismic isolators causes a pounding phenomenon under
severe earthquakes. Therefore, the ASCE 7-16 has provided minimum criteria for the design …
severe earthquakes. Therefore, the ASCE 7-16 has provided minimum criteria for the design …
Utilizing tuned mass damper for reduction of seismic pounding between two adjacent buildings with different dynamic characteristics
Today, population growth and the need for constructing adjacent buildings have raised the
likelihood of pounding between adjacent buildings with different dynamic characteristics …
likelihood of pounding between adjacent buildings with different dynamic characteristics …
Seismic performance and optimization design of a Post-installed Elevator Shear Wall structure
Y Chen, L Shen, M Wen, B Chen, J Jiang - Buildings, 2023 - mdpi.com
Post-installed elevator projects have grown significantly in recent years in response to the
problem of insufficient vertical traffic capacity in existing buildings, but research on the …
problem of insufficient vertical traffic capacity in existing buildings, but research on the …
Structural and non‐structural numerical blind prediction of shaking table experimental tests on fixed‐base and base‐isolated hospitals
F Mazza, A Donnici… - Earthquake Engineering & …, 2024 - Wiley Online Library
Base‐isolated hospitals are frequently preferred to fixed‐base ones because of their
improved seismic structural performance. Despite this, the question remains open on the …
improved seismic structural performance. Despite this, the question remains open on the …
Assessment of the floor response spectra due to pounding between adjacent structures during earthquakes: an alternative approach to study local amplifications
The capability of safety structures, systems and devices to withstand dynamic loadings
(earthquakes, impacts, pounding, falling of heavy objects, etc.) is part of the design basis of …
(earthquakes, impacts, pounding, falling of heavy objects, etc.) is part of the design basis of …