The main aim of presented article is present methodology how sophisticated products as
compressor equipment can be considered and analyzed as a complex technical system …

The main aim of presented article is to present methodology how sophisticated products as
compressor equipment can be considered and analysed as a complex technical system …

Numerical simulation method of the working process of a centrifugal unit contactless face
impulse seal is proposed. A seal functioning physical model was created. Its operation key …

This research presents the analysis of parametric optimization of spark erosion machining
process of Ti-6Al-4V alloy. In spark erosion machining, copper is used as electrode material …

ZnO, ZnO/Alginate coatings were obtained on the pre-anodized Ti6Al4V substrates by the
thermal substrate deposition method (TSD). In the frame of this work, the TSD method was at …

Polyurethanes are materials usable in wide spectrum of applications. This article is aimed at
the properties tailoring of selected polymers by an alteration in initial materials. To achieve …

In annealing, steel coils should be heated and consequently cooled according to the
technological prescription defined for the annealed type of steel. It is appropriate to develop …

A significant disadvantage of parts made of linear block polyurethanes under conditions of
friction contact in the presence of an aqueous medium is the intensification of hydrolysis …

As a result of this study, a device has been developed for the pulsed current annealing of
amorphous magnetic materials covered with non-conductive dissipative material, such as …

Still existing scientific, technical and technological developments to improve the quality of
welded joints of metal pipe structures contain contradictions and uncertainty about the …