Synthesis and magnetic properties of Al–Cu–Fe quasicrystals prepared by mechanical alloying and heat treatment
Elemental powder mixtures of Al, Cu, and Fe with nominal composition of Al65Cu20Cu15
were proceeded in a planetary ball mill for up to 5 h. Phase analysis of as-milled powders …
were proceeded in a planetary ball mill for up to 5 h. Phase analysis of as-milled powders …
Electrochemical characterization of rapidly solidified Al-(Cr, Cu, Ni, Y, Zr)-Fe alloys
K Młynarek-Żak, A Wierzbicka-Miernik… - Electrochimica …, 2022 - Elsevier
The aim of this work was to investigate the multiphase structure of new Al 71 (Cr, Cu, Ni, Y,
Zr) 24 Fe 5 and Al 65 (Cr, Cu, Ni, Y, Zr) 20 Fe 15 alloys, and the influence of chemical …
Zr) 24 Fe 5 and Al 65 (Cr, Cu, Ni, Y, Zr) 20 Fe 15 alloys, and the influence of chemical …
The formation of quasicrystals in Al-Cu-Fe-(M= Cr, Ni) melt-spun ribbons
The influence of Cr and Ni additions in rapidly-solidified Al-Cu-Fe alloys was investigated.
Four compositions, namely, Al 64 Cu 20 Fe 13 Ni 3, Al 63 Cu 18 Fe 10 Ni 9, Al 65 Cu 22 Fe …
Four compositions, namely, Al 64 Cu 20 Fe 13 Ni 3, Al 63 Cu 18 Fe 10 Ni 9, Al 65 Cu 22 Fe …
Effect of Cu and Cr addition on the structure, anticorrosion and nanomechanical properties of new Al-Ni-Fe-(Cr, Cu) alloys
This work used a thermodynamic approach to design and investigate new complex
compositional Al-Ni-Fe-(Cr, Cu) alloys based on aluminum. This work tends to understand …
compositional Al-Ni-Fe-(Cr, Cu) alloys based on aluminum. This work tends to understand …
Thermal spray coating of Al-Cu-Fe quasicrystals: Dynamic observations and surface properties
In this study, we prepared Al-Cu-Fe quasicrystals (QCs) via thermal spray coating after
optimizing the process parameters. Both in-situ XRD and in-situ TEM were used to …
optimizing the process parameters. Both in-situ XRD and in-situ TEM were used to …
Structure, electrical and thermal transport properties of Sn reinforcedAl-Cu-Fe quasicrystalline matrix composite prepared by mechanical milling and subsequent …
The present work deals with the structure, electrical and thermal transport properties of Al-
Cu-Fe quasicrystal (IQC) reinforced with soft Sn phase (10–30 vol%) processed by …
Cu-Fe quasicrystal (IQC) reinforced with soft Sn phase (10–30 vol%) processed by …
Direct observation of growth and stability of Al-Cu-Fe quasicrystal thin films
H Parsamehr, CL Yang, WT Liu, SW Chen, SY Chang… - Acta Materialia, 2019 - Elsevier
Abstract Al-Cu-Fe based quasicrystal thin films exhibit unique surface and mechanical
properties. To better understand the formation of the quasicrystal thin films, we observe …
properties. To better understand the formation of the quasicrystal thin films, we observe …
Microstructures and mechanical properties of conventionally solidified Al63Cu25Fe12 alloy
In this study, the microstructures and mechanical properties of conventionally solidified
Al63Cu25Fe12 alloy after different heat-treatments were investigated. The microstructures of …
Al63Cu25Fe12 alloy after different heat-treatments were investigated. The microstructures of …
The effect of microwave radiation on the formation of quasi-crystalline phases in the Al-Cu-Fe system prepared by induction furnace
V Aghaali, MR Rahimipour, A Faraji… - Materials Today …, 2024 - Elsevier
Aluminium-copper-iron quasi-crystals were prepared by melting raw materials and heat
treatment process using microwave radiation at three temperatures of 600° C, 700° C, and …
treatment process using microwave radiation at three temperatures of 600° C, 700° C, and …
Copper nanocubes on Al65Cu20Fe15 quasicrystalline surface
TP Yadav, SS Mishra, ON Srivastava - Journal of Alloys and Compounds, 2017 - Elsevier
A simple leaching method was developed to synthesize Cu nanocubes having edge length
in the range of 50–80 nm on a quasicrystalline surface. The Al 65 Cu 20 Fe 15 (at%) …
in the range of 50–80 nm on a quasicrystalline surface. The Al 65 Cu 20 Fe 15 (at%) …