Influence of semi‐rigidity of joints on the behaviour of timber structures

HJ Larsen, JL Jensen - Progress in Structural Engineering and …, 2000 - Wiley Online Library
The review starts by identifying the conditions for taking account of the semi‐rigid behaviour
of joints with dowel‐type fasteners, ie well‐defined load–displacement behaviour, no initial …

High‐performance dowel‐type joints for timber structures

PD Rodd, AJM Leijten - Progress in Structural Engineering and …, 2003 - Wiley Online Library
This paper identifies the fundamental factors that affect the performance of dowel‐type joints
between structural timber members. It considers methods that have been used to enhance …

Experimental investigation on lateral performance of pre-stressed tube bolted connection with high initial stiffness

M He, Y Zhao, R Ma - Advances in Structural Engineering, 2016 - journals.sagepub.com
This article presents an experimental study on the moment-resisting capacity and stiffness of
the proposed pre-stressed tube bolted connection. High-strength bolts with tubes were used …

A REVIEW OF MOMENT-RESISTANT STRUCTURAL TIMBER CONNECTIONS.

RJ Bainbridge, CJ Mettem - … of the Institution of Civil Engineers …, 1998 - icevirtuallibrary.com
■ This paper presents a review of methods which can be employed for the formation of
concealed moment-resisting connections in timber structures. The review considers …

Development of wooden portal frame structures with improved columns

M Noguchi, S Takino, K Komatsu - Journal of Wood Science, 2006 - Springer
In Japan, the lifetime cycle of most housing lasts around 20–30 years. A governing factor in
this respect is poor durability due to old-fashioned use of the house. As a solution of this …

[HTML][HTML] Bamboo-reinforced glulam beams: an alternative to fiberglass-reinforced glulam beams

C Echavarria, L Jimenez, JC Ochoa - Dyna, 2012 - scielo.org.co
A research study was undertaken to investigate the mechanical performance of glulam
beams reinforced by fiberglass fabrics or bamboo. Local reinforcement is proposed in order …

Truss plate reinforced bolted connections in parallel strand lumber

B Hockey, F Lam, HGL Prion - Canadian Journal of Civil …, 2000 - cdnsciencepub.com
Cet article résume les résultats d'une investigation sur le comportement de connexions
boulonnées simples et multiples renforcées de plaques de ferme sur un bois à fibres …

A new method for estimating stiffness and strength in bolted timber-to-timber joints and its verification by experiments (II): bolted cross-lapped beam to column joints

M Noguchi, K Komatsu - Journal of wood science, 2004 - Springer
Bolted cross-lapped joints (BCLJs) are one of the basic jointing methods used in Japan and
European countries. There are, however, some problems in the design of BCLJs. With …

Use of technical textiles and densified wood for timber joints

P Haller, J Wehsener - Materials for Buildings and Structures, 2000 - Wiley Online Library
In this study two experimental series were carried out. In the first part the embedding
characteristics according to DIN EN 383 were investigated for solid wood, textile …

Modelling of joints of sandwiches panels

J Mareš, F Wald, Z Sokol - The Paramount Role of Joints into the Reliable …, 2000 - Springer
The lightweight sandwiches panels are produced by a modern and environmental controlled
technology. A typical sandwich panel consist of two covering steel sheets, generally made of …