Effect of NiCrBSi content on microstructural evolution, cracking susceptibility and wear behaviors of laser cladding WC/Ni–NiCrBSi composite coatings
X Luo, J Li, GJ Li - Journal of Alloys and Compounds, 2015 - Elsevier
Ni-based composite coatings were produced on the Ti6Al4V substrate by laser cladding 30
wt.% WC/70 wt.%(Ni–NiCrBSi). The microstructural evolution and mechanical properties …
wt.% WC/70 wt.%(Ni–NiCrBSi). The microstructural evolution and mechanical properties …
Microstructure and properties of Inconel 625+ WC composite coatings prepared by laser cladding
ZH Tian, YT Zhao, YJ Jiang, HP Ren - Rare Metals, 2021 - Springer
Inconel 625+ WC composite coatings were prepared on the surface of 2Cr13 steel by laser
cladding. The microstructure, microhardness and corrosion resistance of the composite …
cladding. The microstructure, microhardness and corrosion resistance of the composite …
Effects of the thickness of the pre-placed layer on microstructural evolution and mechanical properties of the laser-clad coatings
CC Qu, J Li, LL Bai, JZ Shao, R Song… - Journal of alloys and …, 2015 - Elsevier
The coatings with different pre-placed layer thickness values (0.5, 0.8, 1.0, 1.2, 1.5 and 1.8
mm) were fabricated on Ti6Al4V substrates by laser cladding NiCrBSi alloy powders …
mm) were fabricated on Ti6Al4V substrates by laser cladding NiCrBSi alloy powders …
Microstructure and wear resistance of Ni-based WC coating by ultra-high speed laser cladding
Y ZHANG, L LOU, Q XU, Y LI, C LI, C LI - Acta Metall Sin, 2020 - ams.org.cn
Steel materials are highly sourced construction materials owing to their robust mechanical
properties, and they are widely used in the construction industry for building bridges …
properties, and they are widely used in the construction industry for building bridges …
[PDF][PDF] WC 含量对WC/Ni60A 激光熔覆层微观组织的影响
李福泉， 冯鑫友， 陈彦宾 - 中国激光, 2016 - researching.cn
摘要激光熔覆镍基复合涂层在改善H13 模具钢表面性能方面具有显著优势. 在H13
钢表面激光熔覆WC 质量分数分别为20%, 33%, 50% 的WC/Ni60A 复合粉末 …
钢表面激光熔覆WC 质量分数分别为20%, 33%, 50% 的WC/Ni60A 复合粉末 …
[HTML][HTML] SiC 含量对激光熔覆SiC/Ni60A 复合涂层显微组织和耐磨性能的影响
赵龙志， 刘武， 刘德佳， 赵明娟， 张坚 - 材料工程, 2017 - html.rhhz.net
利用LDM2500-60 半导体激光器在45# 钢板上制备SiC 颗粒增强Ni60A 合金激光熔覆涂层,
系统研究SiC 含量对涂层的显微组织, 稀释率, 耐磨性, 摩擦因数和显微硬度的作用规律 …
系统研究SiC 含量对涂层的显微组织, 稀释率, 耐磨性, 摩擦因数和显微硬度的作用规律 …
Microstructure and property of Ni60A/WC composite coating fabricated by fiber laser cladding: Gefüge und Eigenschaften von Ni60A/WC‐Verbundwerkstoff …
KM Wang, HG Fu, YP Lei, YW Yang… - Materialwissenschaft …, 2015 - Wiley Online Library
Laser clad Ni60A/WC composite coating was fabricated on the surface of Q235 steel by
using 6 kW fiber laser. The morphology, composition, and microhardness of composite …
using 6 kW fiber laser. The morphology, composition, and microhardness of composite …
[PDF][PDF] 45 钢表面激光熔覆WC 增强Ni 基涂层性能
江吉彬， 程圆， 黄旭， 练国富， 陈昌荣 - 应用激光, 2019 - researching.cn
摘要为了利用激光熔覆技术实现模切机刀辊刀刃的增材制造, 以激光功率, 扫描速度,
离焦量为影响因素, 在45 钢表面进行WC 增强Ni 基混合粉末的单道激光熔覆正交试验 …
离焦量为影响因素, 在45 钢表面进行WC 增强Ni 基混合粉末的单道激光熔覆正交试验 …
激光淬火及熔覆技术提高柑橘枝粉碎机65Mn 钢锤片耐磨性.
孟亮， 李雄， 黄永俊， 万强， 李明震… - Transactions of the …, 2018 - search.ebscohost.com
为了提高柑橘树枝粉碎机锤片的摩擦性能, 该文主要通过多面激光淬火及激光熔覆技术强化
65Mn 钢锤片表面. 采用金相显微镜, 显微硬度计, 摩擦磨损试验机等探究激光处理后65Mn …
65Mn 钢锤片表面. 采用金相显微镜, 显微硬度计, 摩擦磨损试验机等探究激光处理后65Mn …