In this paper, the Arrhenius-type constitutive equation based on strain compensation was
developed, and the constants of the constitutive equation were determined by linear fitting to …

Abstract {112}< 11 1 ̄> deformation twin, shortened as {112} twin, is usually the dominant
twinning mode in transition metal alloys in a body-centered cubic (BCC) lattice except for …

In this study, the strength and ductility of a direct energy deposited (DEDed) metastable β Ti-
5Al-5Mo-5 V-3Cr (wt%, Ti-5553) alloy was explored by tuning the formation of various α …

The microstructure and high-cycle fatigue properties of 140-mm TC4 titanium alloy double-
sided electron beam welded joints were studied by stratification along the thickness …

Oxygen has been known as an effective strengthening element in titanium (Ti) and its alloys.
However, an over-dose of oxygen can also lead to embrittlement of Ti alloys. To precisely …

Unusual microstructures by 3D printing | Nature Materials Skip to main content Thank you for
visiting nature.com. You are using a browser version with limited support for CSS. To obtain the …

Abstract Properties of metastable β-Ti alloys can be optimized by tuning the rich phase
transformations. Oxygen (O) introduction, inevitable during melting and processing, affects …

The effective use of oxygen as an alloying element in Ti alloys is attractive due to the
reduction of production cost and the increase in strength and hardness of the alloy. Although …

The precipitation behaviors of aging (A) were investigated in Ti-15Mo alloy after solution
treatment (ST), unidirectional rolling (Uni-R) and bidirectional rolling (Bi-R). The results …

This study primarily focuses on analyzing anelastic processes due to interstitial oxygen in
the Ti–25Ta–40Zr alloy. From the structural and microstructural characterization (DRX and …