The high endwall heat transfer in the junction of the hub and vane/blade is very crucial in
turbomachinery and is of great concern for increasing the gas turbine inlet temperature but …

One of the instant ways to improve engine performance is to tune in the intake port. One of
the tunings in the intake port is by polishing the intake port and adding dimple. This impact …

Secondary flow is the most dominant hydraulic loss in axial compressor. If secondary flow is
weak, it could improve the performance of axial compressor. One of the efforts to reduce the …

Gas turbines are broadly used in aerospace and marine propulsion and power production
etc. Investigation of heat transfer in gas turbines is a long-lasting and still an active subject …

Heat transfer on the endwall upstream of the junction of the stator vane/rotor blade with the
hub becomes very high due to the vortices generated as a result of an adverse pressure …

Secondary flow is the most dominant hydraulic loss in axial compressor. If secondary flow is
weak, it could improve the performance of axial compressor. One of the efforts to reduce the …

Separasi aliran 3D merupakan bentuk kerugian aliran yang tidak bisa dihindari pada mesin-
mesin turbo. Pada kompresor aksial separasi aliran 3D akibat adanya interaksi antara …

Boiler is an important part of the Steam Power Plant. One of the combustion systems in the
boiler is using the balance draft method, where combustion air conditions in the furnace …