'The micro/nano reinforced particle'aluminum metal matrix composites (Al-MMCs) are widely
used in manufacturing sector due to light-weight, superior strength-to-weight ratio, better …

In this work, a vibration was applied in the preparation of the Mg/Al bimetal by a novel
compound casting in order to improve the mechanical properties of the Mg/Al bimetal, and …

The current study examined a comprehensive review of the literature on functionally graded
composites, particularly Al-Mg2Si in situ metal matrix composites. Functionally graded Al-Si …

Abstract Al–15 wt.% Mg 2 Si composites were prepared by in situ casting and characterized
in wear tests. Previous to the extrusion of specimens at 470° C–varying extrusion ratio (7.4 …

The effects of solution heat treatment and phosphorous addition on the microstructure and
tensile properties of in situ Al–15% Mg2Si composite specimens have been investigated …

The microstructure and corrosion behavior of Al–10% Mg 2 Si alloy after heat treatment are
investigated. For Al–10% Mg 2 Si in 3.5 wt.% NaCl solution, corrosion of α-Al phase initiates …

The present study discusses the high temperature deformation behaviour as well as
phenomenological constitutive model development of the novel Rheo gravity die cast …

The present work was conducted to study the effects of microstructural evolutions on the
mechanical and wear behavior of an accumulative back extruded aluminum-based in-situ …

The effect of following processing parameters on the electrical and thermomechanical
properties of Al/Si 3 N 4 deposited silica composites was investigated using the Taguchi …

In this study, a computational fluid dynamics (CFD) model is employed to optimise the melt
pouring temperature during Low superheat casting (LSC) of the Al-15 Mg2Si-4.5 Si …