A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells
Energy generated from environmentally friendly, cost-effective solar cells is a key aspect for
developing a clean renewable-energy economy. Non-toxic and Earth-abundant materials …
developing a clean renewable-energy economy. Non-toxic and Earth-abundant materials …
[HTML][HTML] Effect of deep-level defect density of the absorber layer and n/i interface in perovskite solar cells by SCAPS-1D
Abstract In this paper, Solar Cell Capacitance Simulator-1D (SCAPS-1D) was used to study
the absorber layer defect density and n/i interface of perovskite solar cells versus various …
the absorber layer defect density and n/i interface of perovskite solar cells versus various …
Performance enhancement of Sb2Se3 solar cell using a back surface field layer: a numerical simulation approach
SR Al Ahmed, A Sunny, S Rahman - Solar Energy Materials and Solar …, 2021 - Elsevier
In the present work, antimony selenide (Sb 2 Se 3)-based solar cell with a back surface field
(BSF) layer has been designed and studied. The purpose of this research is to improve the …
(BSF) layer has been designed and studied. The purpose of this research is to improve the …
Numerical investigation on performance improvement of WS2 thin-film solar cell with copper iodide as hole transport layer
MM Khatun, A Sunny, SR Al Ahmed - Solar Energy, 2021 - Elsevier
In the present work, device modeling of tungsten disulfide-based thin-film solar cell with
copper iodide as hole transport layer has been performed using the Solar Cell Capacitance …
copper iodide as hole transport layer has been performed using the Solar Cell Capacitance …
A numerical simulation of high efficiency CdS/CdTe based solar cell using NiO HTL and ZnO TCO
Simulation of cadmium sulfide (CdS) and cadmium telluride (CdTe) based solar cell
(ZnO/CdS/CdTe/NiO/Au) using Solar Cell Capacitance Simulator-1D (SCAPS-1D) has been …
(ZnO/CdS/CdTe/NiO/Au) using Solar Cell Capacitance Simulator-1D (SCAPS-1D) has been …
Na induction effects for J–V properties of Cu2SnS3 (CTS) solar cells and fabrication of a CTS solar cell over-5.2% efficiency
A Kanai, M Sugiyama - Solar Energy Materials and Solar Cells, 2021 - Elsevier
The effects of Na on Cu 2 SnS 3 (CTS) solar cells were investigated by focusing on the
electrical properties obtained using electrochemical impedance spectroscopy and Hall …
electrical properties obtained using electrochemical impedance spectroscopy and Hall …
Design and analysis of a SnS 2/WS 2/V 2 O 5 double-heterojunction toward high-performance photovoltaics
Tungsten disulfide (WS2) transition metal dichalcogenide (TMDC) absorber-based solar
cells comprising tin disulfide (SnS2) buffer and vanadium (V) oxide V2O5 back surface field …
cells comprising tin disulfide (SnS2) buffer and vanadium (V) oxide V2O5 back surface field …
Theoretical exploration of high VOC in Cu2SnS3 thin film solar cells towards high efficiency
This article manifests the outstanding performance of copper-tin-sulphide (Cu 2 SnS 3)-
based double-heterojunction (DH) photovoltaic cell. The n-type ZnSe as window and the p+ …
based double-heterojunction (DH) photovoltaic cell. The n-type ZnSe as window and the p+ …
Combating open circuit voltage loss in Sb2Se3 solar cell with an application of SnS as a back surface field layer
Abstract Recently, Sb 2 Se 3 based solar cells have shown severe open-circuit voltage (V
OC) loss that results in low device efficiency. In the present work, a model of Sb 2 Se 3 solar …
OC) loss that results in low device efficiency. In the present work, a model of Sb 2 Se 3 solar …
Unveiling the Structural, Electronic, Optical, Mechanical, and Photovoltaic Properties of Lead-Free Inorganic New Ba3MBr3 (M = As, N, P, and Sb) Perovskites
Highly efficient, stable perovskite solar cells (PSCs) are investigated using barium (Ba)-
based homologous series compound materials such as Ba3MBr3 (M= As, P, Sb, and N) as …
based homologous series compound materials such as Ba3MBr3 (M= As, P, Sb, and N) as …