Ladle slag is a by-product of secondary steel treatment. A typical management option for
ladle slag is stockpiling in open yards. Given the massive production quantities of such …

In the present study, poly (ethylene terephthalate)-based composites were produced and
characterized. These composites were composed by poly (ethylene terephthalate)(PET) …

This study explored the effect of MSH formation on the local atomic arrangements and
mechanical properties of CSH. The elastic moduli of the samples were calculated using …

Concrete with two types of steel fibres and a polypropylene fibre prevented spalling and
preserved the compressive strength at 300° C, which makes these concretes suitable for …

Marble sludge waste was used as a major cement raw material in sintering sulfoaluminate
cement clinker successfully in the laboratory. The influences of raw mix composition as well …

Serious environmental deterioration caused by synthetic waste plastics, and the pollution of
freshwater resources are the most alarming and marked challenges of the 21st century …

A significant amount of the concrete produced worldwide is returned unused to production
plants and has the potential to cause serious damage to natural soils and waters. This study …

Developing robust carbon based composites as an efficient adsorbent for the removal of
dyes using renewable and environmentally friendly raw material source is of paramount …

Calcium sulfoaluminate-ferrite (CSA-F) clinkers were prepared using the alumina production
waste bauxite residue (BR) as one of the raw materials, next to limestone, kaolin, and …

This work deals with the valorization of clay ceramic waste as raw material for the synthesis
of geopolymers. The clay ceramic waste, sodium hydroxide and sodium silicate were the …