A state-of-the-art review of lab-scale inverse diffusion burners & flames: From laminar to turbulent
Based on the previous work, this paper presents a thorough review of the laboratory studies
of IDF (inverse diffusion flame), introducing its history, its current development and …
of IDF (inverse diffusion flame), introducing its history, its current development and …
Revealing soot maturity based on multi-wavelength absorption/emission measurements in laminar axisymmetric coflow ethylene diffusion flames
A novel diagnostic is proposed to characterize the maturity of soot particles in a laminar
axisymmetric coflow ethylene diffusion flame in terms of the spectral dependence of soot …
axisymmetric coflow ethylene diffusion flame in terms of the spectral dependence of soot …
Investigation of OH* chemiluminescence and heat release in laminar methane–oxygen co-flow diffusion flames
L He, Q Guo, Y Gong, F Wang, G Yu - Combustion and Flame, 2019 - Elsevier
OH* chemiluminescence is one of the major spontaneous emission in flames, and often
applied in combustion diagnostics to indicate flame structure, strain rate, equivalence ratio …
applied in combustion diagnostics to indicate flame structure, strain rate, equivalence ratio …
Applications of infrared thermography for studying flows with participating media
DL Blunck - Experimental Thermal and Fluid Science, 2022 - Elsevier
Infrared thermography can be used to provide useful insights into the characteristics of flows
containing participating media (eg, CO 2, H 2 O vapor, CO, CH 4, etc.). What can make this …
containing participating media (eg, CO 2, H 2 O vapor, CO, CH 4, etc.). What can make this …
The effect of oxygen concentration in the co-flow of laminar ethylene diffusion flames
This paper reports an experimental study of the effects of oxygen concentration (OC) in the
oxidant stream on the characteristics of laminar co-flow ethylene diffusion sooting flames …
oxidant stream on the characteristics of laminar co-flow ethylene diffusion sooting flames …
Modeling soot formation in laminar coflow ethylene inverse diffusion flames
A numerical study is conducted using the CoFlame code to investigate the sooting
characteristics of ethylene-fueled laminar coflow inverse diffusion flames (IDFs), aiming to …
characteristics of ethylene-fueled laminar coflow inverse diffusion flames (IDFs), aiming to …
Investigation of soot suppression by ammonia addition to laminar ethylene flames at varying pressure
Blending ammonia with hydrocarbon fuels is a promising pathway to expedite its use in
different industries, as it might offer a good compromise between energy output and …
different industries, as it might offer a good compromise between energy output and …
Assessment of physical soot inception model in normal and inverse laminar diffusion flames
Despite the extensive studies, accurate and reliable modeling of the soot inception process,
especially at high pressure conditions, amenable to multi-dimensional flame simulations …
especially at high pressure conditions, amenable to multi-dimensional flame simulations …
Optical properties of organic carbon and soot produced in an inverse diffusion flame
The carbonaceous particulate matter (soot plus organic carbon) sampled downstream of an
ethylene inverse diffusion flame (IDF) was chemically and spectroscopically analyzed in …
ethylene inverse diffusion flame (IDF) was chemically and spectroscopically analyzed in …
Understanding soot formation: A comprehensive analysis using reactive models in Inverse Non-Premixed Flames
Soot particles produced during the combustion of hydrocarbon fuels pose significant health
and environmental risks while also holding potential for various industrial applications …
and environmental risks while also holding potential for various industrial applications …