The pullout test is one of the methods commonly used to study pullout behavior of
reinforcements. In the current research, large pullout tests (ie 100× 60× 60 cm) have been …

A series of numerically triaxial shear tests on crushable and uncrushable granular soils
reinforced by geogrid were conducted using 3-Dimension Particle Flow Code. The …

In current article, results of large monotonic pull out tests performed on clays reinforced with
two different geogrids (ie G1 & G2) encapsulated with thin layers of granular soil of different …

Geosynthetics play a pivotal role in modern infrastructure projects, with geogrids serving as
a common choice for enhancing bearing capacity and reducing soil settlement in road …

A rigorous upper bound formulation is established for reinforced soils considering both the
tensile rupture of the reinforcement and the relative slippage of the reinforcement-soil …

In this study, an original application called as sanding, which is based on the coating of
conventional geogrids with the help of granular soil material and synthetic resin, is proposed …

The increased use of geosynthetics in road constructions has resulted in a need to better
understanding of geosynthetics properties for the use in design and quality control. For this …

In the present study, an attempt was made to establish a relationship between geogrid
aperture size and aggregate particle size required for a good interlocking between them. A …

It is widely known that vertical displacements and strains occur on the joints and these cause
defects on the asphalt concrete (AC) overlays on existing Portland cement concrete (PCC) …

The use of geosynthetics as a reinforcement material in road pavement layers has been
widely carried out. This study used bus timber which is made as the timber raft construction …