Failure of masonry structures in earthquake: A few simple cost effective techniques as possible solutions
Masonry structures have exhibited their extreme vulnerability even in the event of past minor
to moderate earthquakes. Junction failure followed by out-of-plane collapse of the wall …
to moderate earthquakes. Junction failure followed by out-of-plane collapse of the wall …
Quantifying Hybrid Failure Modes of Unreinforced Masonry Walls through Experimental Data Analysis
Failure mode identification in unreinforced masonry (URM) walls is a challenging task
because of the presence of multiple damage mechanisms, including so-called hybrid …
because of the presence of multiple damage mechanisms, including so-called hybrid …
Numerical modelling of reinforced concrete frames with masonry infills and rubber joints
Masonry infill walls are critical components of reinforced concrete (RC) frames, which may
be damaged even under earthquake events of moderate intensity, thus resulting in …
be damaged even under earthquake events of moderate intensity, thus resulting in …
Masonry walls subjected to in-plane cyclic loading: application of digital image correlation for deformation field measurement
N Mojsilović, AH Salmanpour - International Journal of …, 2016 - inderscienceonline.com
Within a research project on the deformation capacity of in-plane loaded unreinforced
masonry structures, 10 tests were performed on full-scale large walls subjected to in-plane …
masonry structures, 10 tests were performed on full-scale large walls subjected to in-plane …
Multivariable fragility curves for unreinforced masonry walls
This study investigates the effect of the variation of the properties of unreinforced brick
masonry walls, such as aspect ratio, prism strength, and axial load ratio, on determining the …
masonry walls, such as aspect ratio, prism strength, and axial load ratio, on determining the …
A macro‐model for describing the in‐plane seismic response of masonry‐infilled frames with sliding/flexible joints
Masonry infill walls are among the most vulnerable components of reinforced concrete (RC)
frame structures. Recently, some techniques for enhancing the performance of the infills …
frame structures. Recently, some techniques for enhancing the performance of the infills …
Cyclic shear behaviour of masonry triplets with rubber joints
This paper presents the outcomes of an extensive experimental campaign and of numerical
analyses aimed at characterising the cyclic shear behaviour of masonry triplets with mortar …
analyses aimed at characterising the cyclic shear behaviour of masonry triplets with mortar …
Mechanical properties of a new type of block made from shale and coal gangue
J Wu, G Bai, P Wang, Y Liu - Construction and Building Materials, 2018 - Elsevier
A fired heat-insulation hollow block, which has approximate dimensions of 240 mm (L)× 200
mm (W)× 190 mm (H) and a density of 850 kg/m 3, is a new type of wall material made from …
mm (W)× 190 mm (H) and a density of 850 kg/m 3, is a new type of wall material made from …
Structural behavior of masonry walls with soft-layers: An overview of experimental work
N Mojsilović - Current Perspectives and New Directions in …, 2022 - api.taylorfrancis.com
A numerous series of static-cyclic shear tests on masonry elements (triplets), wallettes and
full-scale unreinforced masonry (URM) walls with soft layer membrane placed in the bed …
full-scale unreinforced masonry (URM) walls with soft layer membrane placed in the bed …
Pressure Optimization in Pneumatic Interfaces Using a Single-Bay Seven-Story Infilled Reinforced Concrete Frame: Experimental and Numerical Investigation
Reinforced concrete infilled frames have been studied over the years along with the infilled
openings. To resist the lateral loads that are applied on the frames, stress is transferred from …
openings. To resist the lateral loads that are applied on the frames, stress is transferred from …