The mass transfer behavior of a new batch stirred tank with a fixed bed of Raschig rings at
the bottom was studied using diffusion‐controlled dissolution of copper in acidified …

Rates of mass and heat transfer at the wall of a square agitated vessel fitted with
semicylindrical turbulence promoters were measured using the electrochemical limiting …

Rates of liquid–solid mass transfer at a wall of stirred tank reactor lined with an array of
vertical tubes turbulence promoter were studied using the dissolution of copper in acidified …

Rates of mass transfer at a square array of vertical cylinders contained in a square agitated
vessel were measured by the diffusion controlled dissolution of copper in acidified K2Cr2O7 …

Rates of liquid‐solid mass transfer at a packed bed of Raschig rings fixed to the wall of a
stirred tank were measured by a technique which involves the diffusion‐controlled …

The diffusion controlled dissolution of copper in acidified dichromate solution technique was
used to study solid–liquid mass transfer at the outer surface of helical coils immersed in …

Rates of liquid–solid mass transfer at horizontal array of cylinders resting on the base of a
square agitated vessel were studied. An electrochemical technique which involves …

The present study aimed to investigate the corrosion behavior of a pipeline carrying dilute
pulp fiber suspensions (0.1–0.3% consistency). To examine the role played by pulp fibers on …

The rate of diffusion controlled anodic oxidation of FeSO 4 in rectangular stirred tank reactor
was studied under galvanostatic conditions, H 2 gas was produced as a byproduct at the …

The present work aimed to investigate the effect of crude oil on the rate of diffusion-
controlled corrosion of copper pipeline in acidified dichromate under fully developed flow …