[HTML][HTML] Metallization of polymers and composites: State-of-the-art approaches
Polymers and their composites are widely used for designing structures in aerospace,
automotive, electronic, sport industries due to their lightweight, cost, and processing …
automotive, electronic, sport industries due to their lightweight, cost, and processing …
A review of electroless coatings on non-metals: Bath conditions, properties and applications
The electroless coatings on the non-metal surface possess the desired properties for various
applications in the aerospace, marine, medical, automotive, textile, electronics, household …
applications in the aerospace, marine, medical, automotive, textile, electronics, household …
Mapping the coating failure modes of electroless plated metal on ABS polymer with micro-nano structured interface
Electroless plating is the default industrial process for depositing glossy metallic coatings on
polymeric parts, most often made of acrylonitrile–butadiene–styrene (ABS) plastic …
polymeric parts, most often made of acrylonitrile–butadiene–styrene (ABS) plastic …
Contributions of chemical interactions and mechanical interlocking for the adhesion of electroplated copper to ABS in the Cr (VI) etching process
R Tao, L Fatta, R Melentiev, AK Tevtia… - International Journal of …, 2023 - Elsevier
A typical step in the electroplating of metals to polymer substrates is the preparation of a
substrate surface through sulfochromic acid etching, which is well known for modifying the …
substrate surface through sulfochromic acid etching, which is well known for modifying the …
[HTML][HTML] Greener electrochemical plating of ABS polymer with unprecedented adhesion via hierarchical micro–nanotexturing
Electrochemical plating is the most widely used coating process for metalizing commodity
polymers, such as acrylonitrile–butadiene–styrene (ABS). Conventionally, ABS polymer is …
polymers, such as acrylonitrile–butadiene–styrene (ABS). Conventionally, ABS polymer is …
[HTML][HTML] Identifying adhesion characteristics of metal-polymer interfaces: Recent advances in the case of electroplated acrylonitrile butadiene styrene
Applying thin metallic coating layers on the surface of polymeric parts or structures
(metallization) that is generally performed via electroplating process aims to improve both …
(metallization) that is generally performed via electroplating process aims to improve both …
Towards decoupling chemical and mechanical adhesion at the electroplated metal/polymer interface via precision surface texturing
Electroplating is the most widely used method for coating metals on polymers, the adhesion
of which is ensured by chemical and mechanical interactions of their surface. Unfortunately …
of which is ensured by chemical and mechanical interactions of their surface. Unfortunately …
Evaluation of the bonding properties between low-value plastic fibers treated with microbially-induced calcium carbonate precipitation and cement mortar
Plastic fiber reinforced cementitious materials offer the potential to increase the reusability of
plastic waste and create lower-CO 2 cementitious composites. However, the bonding …
plastic waste and create lower-CO 2 cementitious composites. However, the bonding …
Comparative study on protective properties of CrN coatings on the ABS substrate by DCMS and HiPIMS techniques
The magnetron sputtering deposition of CrN coatings is environmental friendliness and has
high surface gloss. Therefore it is a promising alternative to the electroplating deposition of …
high surface gloss. Therefore it is a promising alternative to the electroplating deposition of …
Photooxidation of the ABS resin surface for electroless metal plating
In this study, we applied a clean, effective and low-cost modification method using light-
activated chlorine dioxide radical (ClO 2•) to oxidize the surface of ABS resin. An increase in …
activated chlorine dioxide radical (ClO 2•) to oxidize the surface of ABS resin. An increase in …