Hydrogen is a zero-emission green fuel containing sufficient energy potentially suitable for
electricity generation. Currently, large quantities of hydrogen are produced using classical …

The formation and emission of sulfur trioxide (SO 3) in coal-fired power plants has received
increasing attention due to its adverse effects on the operation of plant and environment …

The present work is focused on the thermodynamic optimization of organic Rankine cycles
(ORCs) for power generation and CHP from different average heat source profiles (waste …

The issues of fouling, erosion and corrosion are commonly occurring phenomena on the flue
gas heat exchangers for middle/low temperature waste heat utilization due to the special …

Acid dew-point (ADP) is the temperature at which the acid vapor, normally means sulfuric
acid (H 2 SO 4), in flue gas begins to condense. Acid condensation can result in low …

Flue gas waste heat recovery and utilization is an efficient means to improve the energy
efficiency of coal-fired power plants. At present, the surface corrosion and fouling problems …

When cooling combustion flue gas for heat recovery and efficiency gain, the temperature
must not be allowed to drop below the sulfur trioxide dew point. Below the SO3 dew point …

The corrosion and viscous ash deposition characteristics of a rotary air preheater were
investigated. Deposit samples and corroded heat transfer elements were taken from the air …

Capabilities of the bat algorithm optimized extreme learning machine (Bat-ELM) model for
dew point temperature (T dew) estimation were evaluated in this study, in comparison with …

This research was conducted to improve the efficiency of a fire tube boiler with a fixed gate
and screw conveyor for feeding fuel. The efficiency improvement was based on the use of …