An overview of microstructure regulation treatment of Cu-Fe alloys to improve strength, conductivity, and electromagnetic shielding
Y Wu, W Zhang, Y Li, F Yang, H Liu, J Zou… - Journal of Alloys and …, 2024 - Elsevier
Pure copper has excellent conductivity but low strength, which greatly limits its application in
many fields. In recent years, developing high-strength and high-conductivity (HSHC) copper …
many fields. In recent years, developing high-strength and high-conductivity (HSHC) copper …
Unraveling the transformation of ductile damage mechanisms of void evolution and strain localization based on deformation heterogeneity
This study delves into the ductile damage mechanism via exploring the intrinsic nature of the
transformation of void and strain localization induced damages. In tandem with this, tensile …
transformation of void and strain localization induced damages. In tandem with this, tensile …
Unraveling the self-annealing behavior of cryo-rolled Cu-Fe-P alloy sheets: Evidence and implications
Abstract Deformation of Cu-Fe-P alloys at cryogenic temperature (CT) leads to the evolution
of a complex microstructure, which includes deformed and recrystallized grains, strain …
of a complex microstructure, which includes deformed and recrystallized grains, strain …
The effect of post heat treatment on microstructural evolution and mechanical properties of Ti2AlNb intermetallic alloy prepared by point-forging and laser-deposition
S Zhang, M Xi, X Sun, Y Liu, D Bai, S Gao… - Materials Science and …, 2024 - Elsevier
Ti 2 AlNb-based intermetallic alloy is considered to be the latest class of light-weight
structural material severing in the range of 600∼ 750° C. Hybrid interlayer point-forging with …
structural material severing in the range of 600∼ 750° C. Hybrid interlayer point-forging with …
Revealing the inhomogeneous nature of microstructure and texture evolution in the cold-rolled CoCrFeMnNi alloy during static recrystallization
In the present investigation, equiatomic CoCrFeMnNi high entropy alloy (HEA) was
subjected to 80% cold rolling (as-rolled) followed by isothermal annealing treatment at 700° …
subjected to 80% cold rolling (as-rolled) followed by isothermal annealing treatment at 700° …
Self-Annealing Phenomena in the Cold-Rolled and Cryo-Rolled Copper Alloys: A Review
Severely deformed copper (Cu) alloys showed the self-annealing behaviour when exposed
at room temperature (RT) for a prolonged time. This phenomenon results in the evolution of …
at room temperature (RT) for a prolonged time. This phenomenon results in the evolution of …
Elucidating the role of combined latent hardening due to slip-slip and slip-twin interaction for modeling the evolution of crystallographic texture in high nitrogen steels
A thorough framework for addressing the evolution of crystallographic texture in high
nitrogen steels is developed in the present work. The elementary doctrine of the proposed …
nitrogen steels is developed in the present work. The elementary doctrine of the proposed …
[HTML][HTML] Effect of tensile stress annealing on residual stress and strength of C19400 alloy
Y Song, J Yang, K Song, Y Zhou, T Huang… - Journal of Materials …, 2023 - Elsevier
The influence mechanism of tensile stress and tensile stress annealing on the strength and
residual stress of the C19400 alloy is proved. The results show that after annealing at 100° …
residual stress of the C19400 alloy is proved. The results show that after annealing at 100° …
Synergistic improvement of mechanical properties and electrical conductivity of Cu-Fe alloys by rare earth metals Sc and Y addition
X Yu, J Ren, K Gu, Q Zhu, H Cai, L Zheng, W Qiu… - Journal of Alloys and …, 2024 - Elsevier
Abstract Cu-4.44 Fe-0.26 Cr-0.4 Si-0.29 Mg (CFCSM) alloy and Cu-4.73 Fe-0.3 Cr-0.38 Si-
0.28 Mg-0.2 Sc-0.24 Y (CFCSM-Re) alloy were designed. After a series of thermos …
0.28 Mg-0.2 Sc-0.24 Y (CFCSM-Re) alloy were designed. After a series of thermos …
Unveiling the Room-Temperature Softening Phenomenon and Texture Evolution in Room-Temperature-Rolled Cu–0.13 Sn Alloys
In this investigation, annealed Cu–0.13 Sn alloys ie., as-received samples were subjected to
room-temperature rolling (RTR) at reduction ratios (RR) of 40 and 75 pct. Electron …
room-temperature rolling (RTR) at reduction ratios (RR) of 40 and 75 pct. Electron …