Unraveling of advances in 3D-printed polymer-based bone scaffolds

Y Xu, F Zhang, W Zhai, S Cheng, J Li, Y Wang - Polymers, 2022 - mdpi.com
The repair of large-area irregular bone defects is one of the complex problems in orthopedic
clinical treatment. The bone repair scaffolds currently studied include electrospun …

3D printing of bio-based polycarbonate and its potential applications in ecofriendly indoor manufacturing

SJ Park, JE Lee, HB Lee, J Park, NK Lee, Y Son… - Additive …, 2020 - Elsevier
Biomass-derived polymers have been rapidly developed for alleviating excessive fossil-fuel-
based plastic consumption, as green manufacturing is required due to many environmental …

Cellulose hydrogel skeleton by extrusion 3D printing of solution

X Hu, Z Yang, S Kang, M Jiang, Z Zhou… - Nanotechnology …, 2020 - degruyter.com
Cellulose is the most abundant natural polymer on earth, which has obtained increasing
interest in the field of functional materials development for its renewable, high mechanical …

Polymer composites based on polycarbonate (PC) applied to additive manufacturing using melted and extruded manufacturing (MEM) technology

K Bulanda, M Oleksy, R Oliwa, G Budzik… - Polymers, 2021 - mdpi.com
As part of the present work, polymer composites used in 3D printing technology, especially
in Melted and Extruded Manufacturing (MEM) technology, were obtained. The influence of …

[HTML][HTML] Additive manufacturing of carbon nanocomposites for structural applications

M Hisham, C Dileep, L Jacob, H Butt - Journal of Materials Research and …, 2024 - Elsevier
Additive manufacturing (AM), also known as 3D printing, has attracted a lot of attention in
science and technology in recent years. Improvement in AM processes and materials are …

[HTML][HTML] Scaffold printing using biodegradable poly (1, 4-butylene carbonate) ink: printability, in vivo physicochemical properties, and biocompatibility

YB Ji, JY Park, Y Kang, S Lee, HJ Ju, S Choi, BY Lee… - Materials Today Bio, 2021 - Elsevier
This study is the first to assess the applicability of biodegradable poly (1, 4-butylene
carbonate)(PBC) as a printing ink for fused deposition modeling (FDM). Here, PBC was …

압출방식3D 프린팅적층물의단면형태와적층강도와의관계

윤해성, 류민영, 진선철 - 폴리머, 2018 - dbpia.co.kr
3D 프린팅 중 재료압출방식 (material extrusion type) 은 사용이 간편하고 다양한 소재가
가능하며 경제적이어서 이의 활용도가 가장 높다. 본 연구에서는 재료압출방식 3D 프린팅에서 …

[PDF][PDF] 충격강도및결정화속도가개선된Fused Deposition Modeling 방식3D 프린터용Poly-L-lactic acid 기반필라멘트

이종인, 오승주, 정지수, 황영재, 배진우… - 한국산학기술학회 …, 2021 - kais99.org
요약 열가소성 플라스틱의 필라멘트를 사용하는 Fused deposition modeling (FDM) 방식의 3D
프린터는 다른 종류의 3D 프린터에 비해 저렴한 비용과 편의성 때문에 다양한 산업분야에서 …

고온FDM 3D 프린팅공정개발을통한Bio-based PC 적층공정최적화

박성제, 이지은, 박진호, 이낙규, 구명술… - 한국생산제조학회학술 …, 2017 - dbpia.co.kr
고온 FDM 3D 프린팅 공정 개발을 통한 Bio-based PC 적층 공정 최적화 - 한국생산제조학회 학술
발표대회 논문집 - 한국생산제조학회 : 논문 - DBpia 메뉴 건너뛰기 DBpia 전체 search 검색하기 …