Functionally Gradient H13 Tool Steel/Oxygen‐Free High Thermal Conductivity Cu Composites Manufactured by Laser‐Directed Energy Deposition
OH Craig, E Moreau, J Toddy, N Murphy… - steel research …, 2024 - Wiley Online Library
H13 tool steel and copper (Cu) functionally gradient materials (FGMs) have been
manufactured using laser‐directed energy deposition (L‐DED). Differential scanning …
manufactured using laser‐directed energy deposition (L‐DED). Differential scanning …
[PDF][PDF] Investigation of the copper penetration and joint microstructure observed in low alloyed steels
D Varanasi, JT Szabo, P Baumli - NanoWorld J, 2019 - researchgate.net
The present study is aimed at investigation of the microstructural quality of the joint achieved
in low alloyed carbon steels. Two steels were used here, C45 (C 0.45%) and 42CrMo4 steel …
in low alloyed carbon steels. Two steels were used here, C45 (C 0.45%) and 42CrMo4 steel …
Cracking of copper brazed steel joints due to precipitation of MnS upon cooling
The process of brazing of different steel grades by pure liquid copper foil was studied to
reveal the critical conditions when cracks do or do not appear in the braze upon cooling …
reveal the critical conditions when cracks do or do not appear in the braze upon cooling …
[PDF][PDF] WETTING AND GRAIN BOUNDARY PENETRATION OF 42CRMO4 STEEL BY COPPER
DVP BAUMLI - Materials Science and Engineering, 2020 - real-j.mtak.hu
Process like brazing and soldering are used in electronic packaging of integrated circuits,
fabrication of heat exchangers for both commercial and aerospace applications. They are …
fabrication of heat exchangers for both commercial and aerospace applications. They are …