This is the first account of the history of modelling dendritic and cellular solidification. While
Part I reviewed the progress up to the year 2000 [Kurz W, Fisher DJ, Trivedi R. Progress in …

Abstract Alloys of Al-Sn and Al-Si are widely used in tribological applications such as
cylinder liners and journal bearings. Studies of the influence of the as-cast microstructures of …

In order to study the factors of columnar to equiaxed transition (CET) of high-Nb TiAl alloys,
Ti46Al7Nb0. 4W0. 6Cr0. 1B alloy has been fabricated by cold crucible directional …

The aim of the present investigation was to contribute to provide a basis for understanding
how to control solidification parameters, microstructure and mechanical strength of Al–Fe …

Investigations have been made of the solidification structure of three hypoeutectic Al–Fe
alloys, which were directionally solidified under unsteady-state heat flow conditions. The …

In the present study, application of microwave energy was explored for tailoring the
microstructure in AA 2024 alloy through directional solidification route. Microwave …

Recent studies of lead-antimony alloys, used for the production of positive electrodes of lead-
acid batteries, have assessed the influences of both the microstructural morphology and of …

A multiphase TiAl alloy with nominal a composition of Ti–43Al–5Nb-3.5 Cr–1Zr (in at.%) was
fabricated using cold crucible directional solidification equipment at multiple growth rates …

A direct laser deposition processing method was applied to construct compositional and
microstructural libraries of Al x CoCrFeNi in an efficient and high-throughput manner. Among …

Solidification thermal parameters such as the growth rate and the cooling rate depend on
the metal/mold heat transfer efficiency, usually characterized by an interfacial heat transfer …