In situ composite manufacture is an approach to improve interfacial adhesion between
matrix and reinforcements, in which reinforcements are synthesized along composite …

Simplifying the manufacturing of metal matrix composites (MMCs) will allow for their wider
use in applications that require lower density, higher strength, and high wear resistance …

Abstract Cr 3 C 2-20áwt% Ni cermets were prepared by Cr, C and Ni mixed powders using
high energy milling and reactive sintering method comparing with the one contains 1áwt …

In this study, chromium carbide-nickel composites were fabricated by mixing pure Cr 3 C 2
and Ni powders at 1250, 1275, 1300 and 1325° C for 1 h. The effects of the Ni content on the …

In this study, a Cr3C2-NiCr cermet cladding layer was prepared on the surface of Q235 steel
via a high-speed laser cladding method. The effects of laser power, scanning speed, and …

A novel chromium carbide–nickel composite was in situ fabricated through pressureless
sintering in a vacuum furnace using Cr, C, Ni and Mo mixed powders. In this study, the Mo …

In this study, Mo elements (0.5 áwt%, 1.0 áwt%, and 1.5 áwt%) were doped by the powder
metallurgic method to improve the abrasion resistance of in-situ Cr 3 C 2-20áwt% Ni …

Abstract A novel Cr 3 C 2-Ni cermets were successfully in-situ synthesized with Cr, C and Ni
(20 wt%) mixed-powder at 1100° C under 0–6 GPa isostatic pressure using a small-sized …

The present study investigated the effect of mechanical milling on Cr3C2-NiCr coatings
deposited using the HVOF spraying method. The milling process was carried out using …

Zero-valent iron (ZVI) is a valuable material for environmental remediation, because of its
safeness, large availability, and inexpensiveness. Moreover, its reactivity can be improved …