[HTML][HTML] Casting of Particle Reinforced Metal Matrix Composite by Liquid State Fabrication Method: A Review
The purpose of this study is to investigate the characterization of Metal Matrix Composite
(MMC), using liquid state fabrication technique. The paper also considered the latest trend of …
(MMC), using liquid state fabrication technique. The paper also considered the latest trend of …
Optimizing the machining conditions in turning hybrid aluminium nanocomposites adopting teaching–learning based optimization and MOORA technique
In this study, hybrid nanocomposites of aluminium (NHAMMCs) made from AA5052 are
fabricated via stir casting route by reinforcing 12 wt% Si3N4 and 0.5 wt% of graphene to …
fabricated via stir casting route by reinforcing 12 wt% Si3N4 and 0.5 wt% of graphene to …
Study of durability and mechanical properties for utilization of cupola slag as a coarse aggregate in M20 grade green concrete
Cupola slag is an industrial waste generated from cupola furnaces during cast iron
production. The disposal of cupola slag is a matter of burden for the manufacturers of casting …
production. The disposal of cupola slag is a matter of burden for the manufacturers of casting …
Characterization and machinability analysis of aluminium-based metal matrix composites (MMC): A critical review
Hybrid nanocomposite has progressively attracted advanced industrial and automotive
sectors in recent years. Hybrid nanocomposites have emerged as a viable material for a …
sectors in recent years. Hybrid nanocomposites have emerged as a viable material for a …
Exploring energy aspects and tool wear on dry turning of cupola slag-reinforced aluminium metal matrix composites
This study investigates the dry turning of cupola slag reinforced aluminium metal matrix
composites (AMCs) with the aim of exploring the energy aspects and tool wear. The study …
composites (AMCs) with the aim of exploring the energy aspects and tool wear. The study …
[HTML][HTML] Optimisation of design parameters for a novel two-piston ionic compressor applied in hydrogen storage
Y Guo, Q Wang, Y Tang, Y Wang, X Peng - Case Studies in Thermal …, 2024 - Elsevier
The ionic compressor is an advanced and prospective compression technology for
hydrogen storage. However, a complex wave phenomenon was observed inside the …
hydrogen storage. However, a complex wave phenomenon was observed inside the …
Feasibility study on utilisation of discarded waste material as a partial replacement for coarse aggregate in concrete
R Padmapriya, JS Sudarsan, N Sunmathi - Materials Today: Proceedings, 2023 - Elsevier
Electronic waste, or Discarded waste. The electronic goods that have become unwanted,
non-functional, or out-of-date, and have meritoriously grasped the end of their worthwhile …
non-functional, or out-of-date, and have meritoriously grasped the end of their worthwhile …
[HTML][HTML] Investigation of agricultural waste and ZrB2 nanoparticles with reinforcement in aluminum alloy matrix
Agricultural waste has the potential to serve several purposes, such as reinforcement. In
recent times, researchers have incorporated agricultural waste into various materials with …
recent times, researchers have incorporated agricultural waste into various materials with …
Machinability of cupola slag incorporated LM11 matrix composites in turning: Surface roughness and MRR analysis
This study explores the potential of using cupola slag, a byproduct of cast iron production, as
reinforcement in Al-4.5-Cu (LM11) matrix composites. The composites were fabricated using …
reinforcement in Al-4.5-Cu (LM11) matrix composites. The composites were fabricated using …
[PDF][PDF] OPTIMIZATION OF POLYETHYLENE ROTOMOLDED TANK DESIGN FOR STORAGE OF LIQUID MINERAL FERTILIZERS BY THE TAGUCHI METHOD.
V Tyukanko, A Demyanenko… - … -European Journal of …, 2024 - researchgate.net
In this research, by using the finite element method, the effect of five parameters (density of a
liquid mineral fertilizer (ρ), its temperature (T), tank wall thickness (L), spacing of stiffeners …
liquid mineral fertilizer (ρ), its temperature (T), tank wall thickness (L), spacing of stiffeners …