For some time, the chalcopyrite semiconductor CuInSe2 and its alloy with Ga and/or S [Cu
(InGa) Se2 or Cu (InGa)(Se, S) 2], commonly referred as CIGS, have been leading thin‐film …

This first comprehensive description of the most important material properties and device
aspects closes the gap between general books on solar cells and journal articles on …

New processing developments in the Cu (In, Ga) Se 2 (CIGS)-based solar cell technology
have enabled best cell efficiencies to exceed 21%. The key innovation involves the alkali …

Publisher Summary This chapter provides an overview of Cu (In, Ga) Se 2-based
heterojunction thin-film solar cells. The system of copper chalcopyrites Cu (In, Ga, Al)(Se, S) …

Thin CuInS2 films are used as absorber material for solar cells. In the framework of this
thesis films were prepared by reactive annealing of Cu-In precursors in H2S gas. A rapid …

From Light to Dark : Electrical Phenomena in Cu(In,Ga)Se2 Solar Cells diva-portal.org
Digitala Vetenskapliga Arkivet Simple search Advanced search - Research publications …

Heterodioden auf der Basis von Verbindungshalbleitern der Gruppe II-VI und des
Chalkopyrits CuGaSe2 wurden mit einem Rasterkraftmikroskop (AFM) hinsichtlich ihrer …

From the early days of photovoltaics until today, thin-film solar cells have always competed
with technologies based on single-crystal materials such as Si and GaAs. Owing to their …

Thin film solar cells based on polycrystalline Cu (In, Ga) Se2 (CIGSe) absorbers have
reached a maximum conversion efficiency of 22.8% on the laboratory scale, already …

A contactless, nondestructive reflection mode dual beam optical modulation (DBOM)
technique has been employed to investigate the effects of different CdS buffer layer …