Similar and dissimilar material joints of AISI grade 304 (1.4301) and AISI grade 316 (1.4401)
austenitic stainless steel by solid state diffusion bonding and transient liquid phase (TLP) …

High‐quality joints between titanium alloys and stainless steels have found applications for
nuclear, petrochemical, cryogenic, and aerospace industries due to their relatively low cost …

A newly designed AlCoCrCuNi 2 high-entropy alloy (HEA) interlayer was used for vacuum
diffusion bonding of TC4 titanium alloy (TC4) to 316L stainless steel (316L). The sluggish …

Bimetallic structures provide a unique solution to achieve site-specific functionalities and
enhanced-property capabilities in engineering systems but suffer from bonding compatibility …

Abstract Dissimilar joining of Ti-6Al-4V titanium alloy and AISI316L stainless steel was
investigated in the current study by diffusion bonding using Cu/Nb multi-interlayer. Effects of …

TiFe and TiFe 2 intermetallic compounds (IMCs) were effectively suppressed with copper-
based filler wire when joining TC4 titanium alloy to 304 stainless steel by gas tungsten arc …

The effect of brazing parameters on the interfacial microstructure and mechanical properties
of Ti6Al4V titanium alloy/316 L stainless steel brazed joint was investigated. The joint …

Direct bonding between titanium (Ti)/titanium alloy (Ti alloy) and stainless steel (SS)
promotes the formation of various Fe–Ti and Fe–Cr–Ti intermetallics in the diffusion zone …

Bimetallic structures produced via additive manufacturing (AM) have demonstrated
outstanding potential for improving the properties of high-temperature structures. To this …

TiMoNbX (X= Cr, Ta, Zr) RHEA coatings were fabricated on TC4 titanium alloy substrate
using laser cladding technology. The microstructure and corrosion resistance of the RHEA …