Experimental, theoretical, and numerical simulation of the performance of CuInxGa (1-x) S2-based solar cells
In this study, the absorber layers CuInGaS 2 (CIGS) and CuInS 2 (CIS) were deposited on
glass substrates by spray pyrolysis after optimization of the operating parameters. The …
glass substrates by spray pyrolysis after optimization of the operating parameters. The …
[HTML][HTML] Parameters optimization of CIGS solar cell using 2D physical modeling
In this study, the CIGS thin film solar cell has been investigated using the two-dimensional
device simulator Silvaco-Atlas. Thickness and carrier concentration effects of the cell …
device simulator Silvaco-Atlas. Thickness and carrier concentration effects of the cell …
Characteristics of kesterite CZTS thin films deposited by dip-coating technique for solar cells applications
In this work, we synthesis Cu 2 ZnSnS 4 (CZTS) thin films by sol–gel method associated to
dip-coating technique on the ordinary glass substrates. We investigated the effect of dip …
dip-coating technique on the ordinary glass substrates. We investigated the effect of dip …
Deposit on different back contacts: to high-quality CuInGaS2 thin films for photovoltaic application
Abstract Cu (In, Ga) Se 2 (CIGS) absorber layer for photovoltaic application was successfully
deposited by different substrate, indium tin oxide (ITO), fluorine-doped tin oxide (FTO) and …
deposited by different substrate, indium tin oxide (ITO), fluorine-doped tin oxide (FTO) and …
Optoelectronic characterization of CuInGa(S)2 thin films grown by spray pyrolysis for photovoltaic application
Copper–indium gallium disulfide (CIGS) is a good absorber for photovoltaic application.
Thin films of CIGS were prepared by spray pyrolysis on glass substrates in the ambient …
Thin films of CIGS were prepared by spray pyrolysis on glass substrates in the ambient …
The effect of curing temperature and thickness of polybutyl methacrylate siloxane coatings on the corrosion protection of structural steel S355
This study aimed to determine the effects of coating thickness and curing temperature on the
properties of a polybutyl methacrylate-siloxane coating deposited on structural steel S355 …
properties of a polybutyl methacrylate-siloxane coating deposited on structural steel S355 …
Enhanced optical, dielectric, and mechanical properties of starch-based nanocomposite films reinforced with layered double hydroxide
O Rhalmi, R Lahkale, K Ben Zarouala… - Journal of …, 2024 - journals.sagepub.com
In this study, we present the optical, electrical, dielectric, and mechanical properties of
nanocomposite films containing different inorganic filler content. Starch is used as the …
nanocomposite films containing different inorganic filler content. Starch is used as the …
CuInxGa1-xS2 absorber material for thin-film solar cells
MS Pradeepkumar, MI Ahmad - Advanced Ceramic Coatings for Emerging …, 2023 - Elsevier
Solar energy is an important component for fulfilling the growing energy demand. Solar cells
are utilized to convert radiative solar energy into electrical energy. Silicon-based solar cells …
are utilized to convert radiative solar energy into electrical energy. Silicon-based solar cells …
Effect of annealing time and heat flux on solvothermal synthesis of CIGS nanoparticles
Abstract CuIn x Ga (1-x) Se 2 (CIGS) is a renowned absorbing material in solar cell
application due to its wide and tunable direct bandgap with high absorption coefficient. The …
application due to its wide and tunable direct bandgap with high absorption coefficient. The …
Experimental and numerical simulation of the performance of SnS based solar cells
T Garmim, N Benaissa, A Rmili, L Soussi… - The European Physical …, 2022 - epjap.org
In the present study, the SnS thin films have been grown using the sol gel spin coating
technical deposed on a glass substrate. The structural analysis of SnS thin films was …
technical deposed on a glass substrate. The structural analysis of SnS thin films was …