Metal–insulator–metal (MIM) capacitors are inevitable and critical passive components in
analog, mixed-signal, and memory applications. These capacitors occupy nearly 40% of …

Porous alumina films, prepared by anodization of pure aluminum (Al) thin film deposited on
SiO2/Si substrate, has been fabricated and characterized. Constant voltage and constant …

Ambient air flows into the conventional dehydrating breather due to cyclic loading of
transformer. It is the major source of moisture contamination of the transformer oil. Presence …

We report on the fabrication of large-area all-carbon capacitors (ACCs) composed of
multilayer stacks of carbon nanomembranes as dielectrics sandwiched between two carbon …

The direct use of high-ordered porous templates of anodic aluminium oxide for formation of
nanostructures via electrochemical deposition is difficult because the presence of the of …

A novel chemical formulation is presented that enables the chemical solution deposition of
aluminum hydroxide thin films, which transforms into aluminum oxide through subsequent …

Abstract Electrostatic Metal-Insulator-Metal (MIM) nanocapacitors have a great attraction
because of very high specific power density and cycle-life. It possess approximately 100 …

High density three-dimensional AZO/Al 2 O 3/AZO nanocapacitor arrays have been
fabricated for energy storage applications. Using atomic layer deposition technique, the …

Autonomous sensor systems and networks are of increasing demand toward the realization
of the Internet of Things (IoT). In this respect, integrated devices for energy storage and …

In this study, a new concept is explored for an electrolyte-free microcapacitor fabrication
based on mesoporous silicon (mPSi) and zinc oxide (ZnO) electrodes, separated by …