[HTML][HTML] Generation and performance assessment of the global TanDEM-X digital elevation model
The primary objective of the TanDEM-X mission is the generation of a global, consistent, and
high-resolution digital elevation model (DEM) with unprecedented global accuracy. The goal …
high-resolution digital elevation model (DEM) with unprecedented global accuracy. The goal …
TanDEM-X: The new global DEM takes shape
M Zink, M Bachmann, B Brautigam… - … and Remote Sensing …, 2014 - ieeexplore.ieee.org
TanDEM-X (TerraSAR-X add-on for Digital Elevation Measurements) is an innovative
formation flying radar mission that opens a new era in spaceborne radar remote sensing …
formation flying radar mission that opens a new era in spaceborne radar remote sensing …
InSAR time-series estimation of the ionospheric phase delay: An extension of the split range-spectrum technique
Repeat pass interferometric synthetic aperture radar (InSAR) observations may be
significantly impacted by the propagation delay of the microwave signal through the …
significantly impacted by the propagation delay of the microwave signal through the …
TanDEM-X calibrated raw DEM generation
The TanDEM-X mission successfully started on June 21st 2010 with the launch of the
German radar satellite TDX, placed in orbit in close formation with the TerraSAR-X (TSX) …
German radar satellite TDX, placed in orbit in close formation with the TerraSAR-X (TSX) …
TanDEM-X: 10 years of formation flying bistatic SAR interferometry
On June 21, 2010, the TanDEM-X mission was launched and opened a new era in
spaceborne radar remote sensing. The first formation flying radar system was built by …
spaceborne radar remote sensing. The first formation flying radar system was built by …
Interferometric processing of TanDEM-X data
Since July 2010, TerraSAR-X and TanDEM-X jointly acquire interferometric data. Starting
their common commissioning phase with a so called pursuit monostatic configuration with 3 …
their common commissioning phase with a so called pursuit monostatic configuration with 3 …
Urban DEM generation, analysis and enhancements using TanDEM-X
C Rossi, S Gernhardt - ISPRS journal of photogrammetry and remote …, 2013 - Elsevier
This paper analyzes the potential of the TanDEM-X mission for the generation of urban
Digital Elevation Models (DEMs). The high resolution of the sensors and the absence of …
Digital Elevation Models (DEMs). The high resolution of the sensors and the absence of …
[HTML][HTML] 精密轨道支持下的哨兵卫星TOPS 模式干涉处理
吴文豪， 周志伟， 李陶， 龙四春 - 2017 - html.rhhz.net
哨兵卫星采用TOPS 模式成像, 为确保影像干涉相位偏差小于3, 方位向配准精确度需达到0.001
个像素. 本文论证了哨兵卫星精密轨道条件下进行几何配准即可达到较高的配准精度 …
个像素. 本文论证了哨兵卫星精密轨道条件下进行几何配准即可达到较高的配准精度 …
The dual-baseline phase unwrapping correction framework for the TanDEM-X mission part 1: Theoretical description and algorithms
The TanDEM-X mission is the first free flying bistatic SAR mission. It has the primary
objective to generate within a short time frame a global digital elevation model (DEM) of 10 …
objective to generate within a short time frame a global digital elevation model (DEM) of 10 …
Phase unwrapping correction with dual-baseline data for the TanDEM-X mission
The operational dual-baseline phase unwrapping algorithm for the TanDEM-X mission is
based on a combination of separate single-baseline phase unwrapping and a correction …
based on a combination of separate single-baseline phase unwrapping and a correction …