During elevated-temperature thermomechanical processing, the occurrence of
recrystallization during straining is known as dynamic recrystallization (DRX), which usually …

Magnesium (Mg) has great potential for application in the automotive and aerospace sectors
due to its abundant resources and low density. However, the industrial applications of Mg …

In this work, Ti P/VW94 composites were prepared by semi-solid stirring assisted ultrasonic
vibration followed by hot extrusion. The results indicate that the presence of Ti particles can …

This work reported the transformation of (Mg, Zn) 24 Y 5 phase into a long period stacking
ordered (LPSO) structure and the reduction of constituent fluctuations induced by massive …

Microstructures, mechanical properties by tensile deformation, and precipitation kinetics
during elevated-temperature homogenization/aging heat treatment of Mg 95.5 Y 3 Zn 1.5 …

Abstract Long-Period Stacking Ordered (LPSO) phases in the Mg-Y-Zn alloys can
significantly improve comprehensive mechanical properties of the Mg-based alloys. The …

The Sc microalloying can decrease the corrosion rates of Mg-Gd-Zn alloys by about two
orders of magnitude, and thus significantly improving corrosion resistance of Mg-Gd-Zn …

The effect of yttrium addition on the evolution of phases, grain refinement, and mechanical
behavior of Mg-0.5 Ni cast alloy was investigated. It was observed that while the base alloy …

Here it was found that the pulsed current can improve the plasticity of Mg-13Gd-4Y–2Zn-0.5
Zr rare earth magnesium alloy. When the parameters of pulsed current-assisted tension are …

The aim of this study was to substitute Y with Gd for Mg–2Ni–2Y alloy and investigate the
effect on the alloy's microstructures and mechanical properties. To achieve this purpose, the …