Investigating factors affecting on the efficiency of dynamic mixers
S Parvizi, E Keshavarz Alamdari… - Mineral Processing …, 2016 - Taylor & Francis
Mixers are widely used in chemical and hydrometallurgical processes. For instance, one of
the greatest challenges in the field of hydrometallurgy process is agitation made by impeller …
the greatest challenges in the field of hydrometallurgy process is agitation made by impeller …
Drop size distribution in batch stirred tank at high organic to aqueous phase ratios
PA Mahakal, HT Rangwala, AW Patwardhan - … Engineering Research and …, 2023 - Elsevier
Hydrodynamic studies were carried out at high organic to aqueous (O/A) phase ratios in a
liquid-liquid batch stirred tank. Minimum mixing speed for complete dispersion, Sauter mean …
liquid-liquid batch stirred tank. Minimum mixing speed for complete dispersion, Sauter mean …
Simultaneous effect of nanoparticles and surfactant on emulsion liquid membrane: Swelling, breakage and mean drop size
P Davoodi-Nasab, A Rahabr-Kelishami… - Separation and …, 2019 - Elsevier
In this study, the effect of multi-walled carbon nanotubes (MWCNTs) and Span-85 as a
surfactant on drops breakup and coalescence rates of emulsion liquid membrane (ELM) due …
surfactant on drops breakup and coalescence rates of emulsion liquid membrane (ELM) due …
Hydrodynamic study of an emulsion liquid membrane containing carbon nanotube in a mixer–settler: mean size and size distribution of emulsion globules
Mean size and size distribution of emulsion globules are indicative of interfacial area
available for mass transfer in an emulsion liquid membrane (ELM) system. In this study …
available for mass transfer in an emulsion liquid membrane (ELM) system. In this study …
An experimental study of immiscible liquid–liquid dispersions in a pump–mixer of mixer–settler
Q Tang, J Zhang, Y Wu, Y Wang, Z Liu - Chinese Journal of Chemical …, 2020 - Elsevier
Drop size distribution (DSD) or mean droplet size (d 32) and liquid holdup are two key
parameters in a liquid–liquid extraction process. Understanding and accurately predicting …
parameters in a liquid–liquid extraction process. Understanding and accurately predicting …
Evaluation of mean diameter and drop size distribution of an emulsion liquid membrane system in a horizontal mixer-settler
M Yaghoobi, P Zaheri, SH Mousavi, BA Ardehali… - … Research and Design, 2021 - Elsevier
AW/O emulsion consisting of distillated water, kerosene and Span 80 was prepared to be
employed in a horizontal mixer settler. The effect of stirring speed, flow ratio, total flow, Span …
employed in a horizontal mixer settler. The effect of stirring speed, flow ratio, total flow, Span …
Application of hydrophobic superparamagnetic nanoparticles in the solvent extraction of nickel aiming to accelerate phase disengagement
F Firouzi, SK Sadrnezhaad - Colloids and Surfaces A: Physicochemical and …, 2024 - Elsevier
This study investigated the application of a magnetic organic phase containing hydrophobic
superparamagnetic nanoparticles to accelerate phase disengagement in solvent extraction …
superparamagnetic nanoparticles to accelerate phase disengagement in solvent extraction …
On the mean drop size of toluene/water dispersion in the presence of silica nanoparticles
M Raji-Asadabadi, H Abolghasemi… - … Research and Design, 2013 - Elsevier
An experimental study of mean drop size (d 32) has been conducted in a horizontal mixer–
settler for toluene/water system. The effects of feed holdup and agitation speed on d 32 were …
settler for toluene/water system. The effects of feed holdup and agitation speed on d 32 were …
[HTML][HTML] 刚性/柔性桨叶作用的湍流液液分散体系的液滴尺寸与分布
袁铭扬, 徐佳伟, 曾宏伟, 陈律名, 张玮, 陈冰冰 - 高校化学工程学报, 2022 - xml-data.org
为提高搅拌槽内不溶液液两相的分散效果, 将柔性桨叶应用于油/水分散系统以替代传统刚性
搅拌桨, 并通过摄影法获得系统内液滴尺寸与分布, 探究了桨叶类型和分散相体积分数对液滴 …
搅拌桨, 并通过摄影法获得系统内液滴尺寸与分布, 探究了桨叶类型和分散相体积分数对液滴 …
[PDF][PDF] Full Characterization of Sarcheshmeh and Khatoon-Abad Copper Anode Slimes: Characterization Impact on the Decopperization Operation
M Alaviyan, S Shakibania, M Mokmeli… - International Journal of …, 2023 - ije.ir
Copper anode slime, a valuable by-product generated during the electrorefining process, is
an important secondary resource for the recovery of metals, such as gold, silver, selenium …
an important secondary resource for the recovery of metals, such as gold, silver, selenium …