Titanium and titanium based alloy prepared by spark plasma sintering method for biomedical implant applications—A review
Titanium has been widely used in biomedical implant applications due to its excellent
mechanical properties and biocompatibility. However, manufacturing titanium was quite …
mechanical properties and biocompatibility. However, manufacturing titanium was quite …
A review on β-Ti alloys for biomedical applications: The influence of alloy composition and thermomechanical processing on mechanical properties, phase …
G Kanapaakala, V Subramani - Proceedings of the …, 2023 - journals.sagepub.com
Titanium and its alloys are potential materials for orthopedic implant applications due to their
appropriate biological and mechanical behavior. As biocompatibility and biomechanical …
appropriate biological and mechanical behavior. As biocompatibility and biomechanical …
[HTML][HTML] Effect of combined lean additions of isomorphous and eutectoid beta stabilisers on the properties of titanium
Reduction of the manufacturing cost of titanium and the development of new alloys are
crucial to effectively harvest the benefits derived by the use of titanium in industrial …
crucial to effectively harvest the benefits derived by the use of titanium in industrial …
[HTML][HTML] Work hardening of quaternary powder metallurgy Ti alloys
The concurrent addition of Al as α stabiliser and Nb and Cu or Mn as β stabilisers was used
to design new powder metallurgy quaternary Ti alloys and investigate their manufacturability …
to design new powder metallurgy quaternary Ti alloys and investigate their manufacturability …
Processing and properties of powder metallurgy Ti-Cu-Nb alloys
Abstract Binary Ti-Cu and Ti-Nb alloys have been extensively studied for biomedical
applications, but the potential of ternary Ti-Cu-Nb alloys, where the combined benefits of …
applications, but the potential of ternary Ti-Cu-Nb alloys, where the combined benefits of …
Correlation between microstructure and tensile properties of powder metallurgy Ti-6Nb-x (Fe or Mn) alloys
The individual addition of Nb, Fe, or Mn to Ti has been greatly studied, but their combined
addition has been much less understood, especially for the Ti-Nb-Mn system. Moreover, the …
addition has been much less understood, especially for the Ti-Nb-Mn system. Moreover, the …
[HTML][HTML] Dental implants: modern materials and methods of their surface modification
C Sotova, O Yanushevich, N Kriheli, S Grigoriev… - Materials, 2023 - mdpi.com
The development of dental implantology is based on the detailed study of the interaction of
implants with the surrounding tissues and methods of osteogenesis stimulation around …
implants with the surrounding tissues and methods of osteogenesis stimulation around …
Biocompatibility, corrosion, and wear resistance of β titanium alloys for biomedical applications
A novel β–Ti-xNb-3.5 Sn alloys (x= 33, 36, and 39 wt.% Nb) were made using mechanical
alloying of elemental powders by cold isostatic pressing. These powders were blended and …
alloying of elemental powders by cold isostatic pressing. These powders were blended and …
[HTML][HTML] Superelastic behavior of Ti-Nb alloys obtained by the Laser Engineered Net Shaping (LENS) technique
The effect of Nb content on microstructure, mechanical properties and superelasticity was
investigated for a series of Ti-xNb alloys, fabricated by the laser engineered net shaping …
investigated for a series of Ti-xNb alloys, fabricated by the laser engineered net shaping …
Development of Novel Antibacterial Ti-Nb-Ga Alloys with Low Stiffness for Medical Implant Applications
With the rising demand for medical implants and the dominance of implant-associated
failures including infections, extensive research has been prompted into the development of …
failures including infections, extensive research has been prompted into the development of …