Effect of tribological process parameters on the wear and frictional behaviour of Cr-(CrN/TiN) composite coating: an experimental and analytical study
The present study optimizes the tribological parameters for Cr-(CrN/TiN) composite coating
on DAC-10 tool steel using the effective concept of Taguchi design. The effect of the most …
on DAC-10 tool steel using the effective concept of Taguchi design. The effect of the most …
Effect of AISI H13 steel substrate nitriding on AlCrN, ZrN, TiSiN, and TiCrN multilayer PVD coatings wear and friction behaviors at a different temperature level
Moving components of industrial machines and tools are subjected to wear and friction. This
reduces their useful life and efficiency in running conditions, particularly at high …
reduces their useful life and efficiency in running conditions, particularly at high …
An Excellent Corrosion-Resistant Al-Si-Mg-Mn Hot-Dip Coating for Steel
The coating characterization and property assessment of hot-dip Al-Si-Mg-Mn alloy-coated
steel are described in this work. To assess the coating's morphology, composition, phase …
steel are described in this work. To assess the coating's morphology, composition, phase …
Dry sand abrasion characteristics of WC-10Ni+ NiCrBSi coatings
J Shi, J Zhu, X Xu, C Liu, K Liu, Y Qiao, J Zou - Physica Scripta, 2023 - iopscience.iop.org
Abstract A WC-10Ni/NiCrBSi coating was prepared and applied to the surface of Q235 steel
through vacuum brazing. Using a self-developed dry sand abrasion test machine, the effects …
through vacuum brazing. Using a self-developed dry sand abrasion test machine, the effects …
Experimental study on micro-abrasion behavior of hard coatings: the role of load, sliding distance and abrasive particle size
In this study, the micro abrasion wear behavior of the TiN, TiAlN, TiAlN/TiSiN and AlCrN
coated WC materials was investigated. The coating process was carried out using the …
coated WC materials was investigated. The coating process was carried out using the …
Effect of wear parameters and their optimization for wear characteristics of TiCrN thin film using novel MCDM method
This study focuses on experimental and statistical analysis to explore the influence of wear
parameters and its optimization for TiCrN thin film deposited tool steel under dry sliding …
parameters and its optimization for TiCrN thin film deposited tool steel under dry sliding …
Investigating the Impact of Monolayer and Multilayer PVD Coatings on Cutting Tool Friction Factor
K Paulian, V Manickam, V Tharanipathy - 2024 - researchsquare.com
The purpose of the paper is to examine the ZrSiN, monolayer TiN, and multilayer TiSiN PVD
coatings' friction factors on tempered steel 45X (50 HRC) and steel 45 (180 HB). The …
coatings' friction factors on tempered steel 45X (50 HRC) and steel 45 (180 HB). The …