Failure analysis of gas and wind turbine blades: A review

AHI Mourad, A Almomani, IA Sheikh… - Engineering Failure …, 2023 - Elsevier
The energy transition is growly rapidly. Yet, energy security and sustainability are still global
concerns. The transition from fossil based, eg, gas, to renewables, eg, wind, hence, require …

Structure-property correlation and high-temperature erosion performance of Inconel625-Al2O3 plasma-sprayed bimodal composite coatings

G Prashar, H Vasudev - Surface and Coatings Technology, 2022 - Elsevier
In the present experimental work, Inconel-625 (IN625) was reinforced with Al 2 O 3 (30 wt%)
to develop composite coatings with plasma spraying technique on ASTM SA210 GrA1 boiler …

Erosion behaviour of HVOF sprayed Alloy718-nano Al2O3 composite coatings on grey cast iron at elevated temperature conditions

H Vasudev, L Thakur, H Singh… - … Metrology and Properties, 2021 - iopscience.iop.org
The current study investigates the erosion performance of high-velocity oxy-fuel (HVOF)
sprayed Alloy718-nanoAl 2 O 3 composite coatings on cast iron. The effect of the addition of …

Performance of hardfaced/heat treated materials under solid particle erosion: A systematic literature review

C Jindal, BS Sidhu, P Kumar, HS Sidhu - Materials Today: Proceedings, 2022 - Elsevier
The solid particle erosion (SPE) is a serious issue, and a growing challenge for industrial
components exposed to the atmosphere under solid particles flow along with liquid or gas …

Effect of impact angle and velocity on erosion of API X42 pipeline steel under high abrasive feed rate

MA Islam, ZN Farhat - Wear, 2014 - Elsevier
The cost of erosion attack to the global oil and gas industry has drawn significant attention
amongst researchers in recent years. Erosion is a complex phenomenon and in order to …

Optimization and erosion wear response of NiCrSiB/WC–Co HVOF coating using Taguchi method

AS Praveen, J Sarangan, S Suresh… - Ceramics …, 2016 - Elsevier
In this work, high velocity oxy-fuel (HVOF) thermal spraying was used to develop 65 wt%
NiCrSiB–35 wt% WC–Co coatings on AISI 304 stainless steel substrate. Taguchi method …

WC10Co4Cr coatings deposited by HVOF on martensitic stainless steel for use in hydraulic turbines: Resistance to corrosion and slurry erosion

GA Ludwig, CF Malfatti, RM Schroeder… - Surface and Coatings …, 2019 - Elsevier
The corrosion resistance and slurry erosion wear of WC-10Co-4Cr coatings sprayed by the
High Velocity Oxy-Fuel Flame (HVOF) method on an AISI 410 stainless steel substrate …

Resistance to slurry erosion by WC-10Co-4Cr and Cr3C2− 25 (Ni20Cr) coatings deposited by HVOF stainless steel F6NM

IA Maekai, GA Harmain, JH Masoodi - International Journal of Refractory …, 2022 - Elsevier
Hydroelectric turbine machinery experience extreme wear and tear due to slurry erosion and
is one of the leading causes for the unplanned shutdown of hydro power plants. The …

Effect of nano-Al2O3 addition on the microstructure and erosion wear of HVOF sprayed NiCrSiB coatings

AS Praveen, A Arjunan - Materials Research Express, 2019 - iopscience.iop.org
Abstract Development of nanostructured high velocity oxy-fuel (HVOF) coatings with low
porosity, high strength and increased wear resistance is still in its infancy. Combining …

Erosion-wear and intergranular corrosion resistance properties of AISI 304L austenitic stainless steel after low-temperature plasma nitriding

X Qin, X Guo, J Lu, L Chen, J Qin, W Lu - Journal of Alloys and Compounds, 2017 - Elsevier
In this paper, AISI 304L austenitic stainless steel has been subjected to plasma nitriding at
673 and 681 K lasted for 6, 18, 24, and 36 h. The morphology, microhardness, phase, and …