The hottest parts of aerospace components are often made of heat-resistant materials. Due
to the high requirements in such parts and accelerated wear rates, machining is a …

A new prediction method was proposed based on the positive feedback relationship
between tool geometry and tool wear rate. Dry orthogonal cutting of Inconel 718 was used …

Due to its challenging manufacturing and intricate morphology, the aluminum alloy
transmission intermediate shell used in vehicle transmission has been the focus of many …

Using electroslag welding to obtain Inconel 625 cladding can significantly reduce the
manufacturing cost of products that require corrosion resistance. The constitutive model and …

The performance of a self-propelled rotary carbide tool when cutting hardened steel is
evaluated in this study. Although various models for evaluating tool wear in traditional (fixed) …

Ultrasonic vibration assisted turning (UVAT) is advanced machining process where
vibrational assistance of high frequency and low amplitude is provided to tool. In the present …

The severe wear of cemented carbide tool can lead to problems such as short tool life and
poor part surface integrity. Fortunately, it has been found that the tool wear may be reduced …

Tungsten carbides are typical difficult-to-cut materials due to their high hardness and
brittleness, which cause severe tool wear and shorten tool life when being machined during …

In this paper, the authors present the results obtained within a complex experimental
program that focuses on determining the tribological characteristics of the active part …

Abrasion wear is a significant concern for cutting tools, particularly when milling asphalt
concrete due to the presence of hard mineral aggregate particles. The pressure exerted on …