Microstructural evolution and mechanical properties of 2195 Al-Li alloy processed by rapid solidification and thermo-mechanical processing

P Lv, R Wang, C Peng, Z Cai - Journal of Alloys and Compounds, 2023 - Elsevier
Abstract 2195 Al-Li alloy billet was prepared by gas atomization (GA) and hot isostatic
pressing (HIP), followed by hot extrusion and different heat treatments. Microstructural …

Hot deformation behavior and microstructural evolution of the Al-Cu-Li alloy: A study with processing map

J Tang, Y Yi, H He, S Huang, J Zhang… - Journal of Alloys and …, 2023 - Elsevier
Abstract The 2195 Al-Cu-Li alloy is widely utilized for the fabrication of key aerospace
vehicle components; hence, an in-depth understanding of its hot deformation behavior is …

Hot deformation induced microstructural evolution in local-heterogeneous wire+ arc additive manufactured 2219 Al alloy

Y Zhou, X Lin, N Kang, Z Wang, H Tan… - Journal of Alloys and …, 2021 - Elsevier
This study investigates the hot deformation behavior and relative microstructural evolution of
a wire+ arc additive manufactured (WAAMed) 2219 Al alloy, in which hot compression was …

Microstructure evolution of spray deposited and as-cast 2195 Al-Li alloys during homogenization

Y Wang, X Ma, G Zhao, X Xu, X Chen… - Journal of Materials …, 2021 - Elsevier
In this paper, a comparative study on the spray deposited and as-cast 2195 alloy was
carried out to reveal their microstructure evolutions and differences during the …

[HTML][HTML] Hot deformation behavior and microstructure evolution of the spray deposited and secondary hot extruded 2195 Al–Li alloy

G Yang, W Xu, X Jin, Z Wang, D Shan, B Guo - Journal of Materials …, 2022 - Elsevier
This work aims to investigate the influence of hot deformation parameters on the
microstructure evolution and deformation behavior of the extruded 2195 Al–Li alloy, as well …

Microstructures and mechanical properties of spray deposited 2195 Al-Cu-Li alloy through thermo-mechanical processing

Y Wang, G Zhao, X Xu, X Chen, W Zhang - Materials Science and …, 2018 - Elsevier
A large-scale billet of 2195 Al-Cu-Li alloy was prepared by spray deposition technology. The
hot extrusion, solution treatment, pre-stretching, and aging treatment were performed on the …

[HTML][HTML] Investigation on hot deformation behavior and quenching precipitation mechanism of 2195 Al-Li alloy

X Wang, G Zhao, L Sun, Y Wang, S Xu, Z Lv - Materials & Design, 2023 - Elsevier
Al-Li alloys suffer from a narrow processing window. The hot deformation behavior of the
ramp heating homogenized 2195 Al-Li alloy was investigated by hot compression test in the …

Formability enhancement and deformation mechanism of 2195 AlLi alloy sheet in cryogenic forming

X Chen, X Fan, A Xu, Z Yi, S Yuan - Materials Characterization, 2023 - Elsevier
Cryogenic medium pressure forming is very suitable for producing thin-walled, complex-
shaped aluminum alloy components. In order to evaluate the feasibility of the new forming …

Bonding mechanism and mechanical properties of 2196 Al-Cu-Li alloy joined by hot compression deformation

X Xu, X Ma, S Yu, G Zhao, Y Wang, X Chen - Materials Characterization, 2020 - Elsevier
In this study, the hot compression bonding (HCB) tests of 2196 Al-Cu-Li alloy were carried
out under different temperatures, strain rates and strains. The interfacial microstructure …

Effect of temperature and strain rate on hot deformation behavior and microstructure of Al-Cu-Li alloy

N Nayan, SVSN Murty, S Chhangani, A Prakash… - Journal of Alloys and …, 2017 - Elsevier
Abstract Al-Cu-Li alloy (AA2195) was produced using vacuum induction melting (VIM)
furnace under dynamic argon atmosphere. The as-cast billets were homogenized using a …