Abstract About 6‐8 wt% yttria‐stabilized zirconia (YSZ) is the industry standard material for
thermal barrier coatings (TBC). However, it cannot meet the long‐term requirements for …

To achieve high oxygen blocking structure of the ZrB 2-MoSi 2 coating applied on carbon
structural material, ZrB 2-MoSi 2 coating was prepared by spark plasma sintering (SPS) …

Oxidation inhibition behaviors of the HfB 2-SiC-TaSi 2 coatings fabricated by spark plasma
sintering method were investigated at 1700° C. The inerting protection capability and …

The hot corrosion behavior of plasma-sprayed HfSiO 4 coatings exposed to molten calcium
magnesium aluminosilicate (CMAS) and steam was investigated. No reactive crystallization …

The review summarizes the advances of Russian and international science in the
development and improvement of the properties of carbon–carbon and carbon–ceramic …

To improve the ablation resistance of carbon/carbon composites in cyclic ablation
environment, SiC/HfC ceramic coating reinforced by HfC nanowires was prepared. The …

A brand new HfB 2-SiC-MoSi 2 coating was fabricated to protect carbon/carbon (C/C)
composites with inner SiC coating from oxidation, which was prepared by in-situ synthesis …

A new tri‐layer Yb2SiO5/Yb2Si2O7/Si coating was fabricated on SiC, C/SiC, and SiC/SiC
substrates, respectively, using atmospheric plasma spray (APS) technique. All coated …

In this work, differences of microstructure and thermo-mechanical properties between air
plasma sprayed Yb 2 SiO 5 and Yb 2 Si 2 O 7 coatings were investigated. Thermal shock …

Rare earth monosilicates RE 2 SiO 5 have been considered as promising environmental
barrier coating materials for silicon-based ceramics due to their low thermal conductivity and …