Electroless binary Ni–P and ternary Ni–W–P alloy coatings and electroless composite (Ni–P–
ZrO2 and Ni–P–W–ZrO2) nickel coatings were deposited. Baths with aminoacetic acid as …

In this study, we examined the thermal stability, bonding strength, and interfacial
characteristic of a Ni–W–P coating applied for solder joint of Bi2Te3 thermoelectric modules …

Electroless deposited ternary alloys have been reviewed in relation to the chemical state of
the third element, its localisation and the possible influence of these on alloy properties …

Abstract Ternary Ni–W–P coatings were electrolessly plated on an Al alloy substrate. The
influence of the main parameters including: the concentrations of sodium hypophosphite …

The ternary alloy Ni–W–P and its WS2 nanocomposite coatings were successfully obtained
on low-carbon steel using the electroless plating technique. The sodium tungstate …

The electroless plated nickel (Ni–P) coatings are widely applied in the electronics industry.
Addition of a third element, such as Re, to the coatings may improve their thermal stability …

Electroless ternary NiWP deposits were prepared using an alkaline citrate bath. Sodium
tungstate concentration in the bath was varied from 5 to 40g/L to obtain NiWP deposits …

Abstract Ni–P and Ni–P–Re coatings with various concentrations of P and Re were obtained
on copper substrate by the electroless deposition from succinate baths. The influence of …

The Ni-WP alloy coatings have been widely used in the fields of electronic, aviation and
anticorrosion, owing to their high hardness, good wear resistance and strong corrosion …

In the present investigation electroless ternary NiWP–Al2O3 composite coatings were
prepared using an electroless nickel bath. Second phase alumina particles (1µm) were used …