Energy applications employing high-temperature superconductors (HTS), such as
motors/generators, transformers, transmission lines and fault current limiters, are usually …

Recent progresses in the second generation REBa 2 Cu 3 O 7− x (RE123) coated conductor
(CC) have paved a way for the development of superconducting solenoids capable of …

A 26 T 35 mm winding diameter all-GdBa 2 Cu 3 O ${} _ {7-x} $(GdBCO) magnet was
designed by the MIT Francis Bitter Magnet Laboratory, and constructed and tested by the …

Superconductors are essential components of future fusion power plants. The magnet coils
responsible for producing the field required for confining the fusion plasma are exposed to …

REBa 2 Cu 3 O x ((REBCO), RE= rare earth) superconductor tapes with moderate levels of
dopants have been optimized for high critical current density in low magnetic fields at 77 K …

We present a No-Insulation (NI) Multi-Width (MW) winding technique for an HTS (high
temperature superconductor) magnet consisting of double-pancake (DP) coils. The NI …

High-temperature superconducting coated conductors (CCs) are considered an enabling
ultra-high field (UHF) tape-conductor technology due to their extremely high engineering …

The resistive superconducting fault current limiter is well known for its simple structure and
outstanding current-limiting effect, and it is broadly applied in power grid systems. The …

Rare earth (RE) based second generation (2G) high temperature superconducting (HTS)
wire is an emerging material that has been commercially available to a wide range of …

Superconducting flux pumps (FP) are capable of supplying superconducting circuits with
high currents by additively supplying current over a number of cycles without introducing …