We review progress in the design of high field superconducting cable-in-conduit conductors
(CICCs) for fusion applications, with special attention to the results of recent key …

To suppress the low-magnetic-field instability (flux jumps in low magnetic fields) of a rapid-
heating, quenching and transformation (RHQT) processed Nb 3 Al superconductor, we had …

The full-matrix set of combined temperature (4.2–14 K) and applied axial strain (ε a) data for
the bulk pinning force of a technological Nb 3 Sn wire (OST type-I) has been studied at fields …

Properties of rapid heating, quenching, and transformation (RHQT)‐treated powder‐in‐tube
(PIT) Nb3Al1− xSnx wires are studied herein. After the RHQ process, the body‐centered …

Very recently Yu et al. studied the structural stability of Nb3Al over a range of pressure up to
39.5 GPa. They have noticed an anomaly in the pressure volume plot beyond 19.2 GPa. The …

Nb3Al superconducting wires produced by rapid heating and quenching (RHQ) method
have been developed for application to high field accelerator magnet. In an A15-type …

We prepared three types of non-Cu RHQ-Nb 3 Al wire sample with different matrix
structures: an all-Ta matrix, a composite matrix of Nb and Ta with a Ta inter-filament, and an …

Nb3Al, which is widely used in high field magnets, was studied under a range of pressures
up to 39.5 GPa using diamond anvil cell. The Nb3Al superconductor is structurally stable up …

Nb3Al superconducting wires produced by rapid heating and quenching (RHQ) have been
developed for high-field accelerator magnets. It is known that critical currents of A15 …

The aim of this thesis is to present a comprehensive study of the effect of three-dimensional
stresses on industrial A15 superconductors, from the microscopic and macroscopic point of …