Aluminum bronze is a complex group of copper-based alloys that may include up to 14%
aluminum, but lower amounts of nickel and iron are also added, as they differently affect …

The hardness and toughness of regenerated cemented carbides, in general, are
contradictory. Therefore, it is critical to explore regenerated cemented carbides with both …

WC-10 wt% Co cemented carbides containing various amounts (0–4 wt%) of SiC
nanoparticles were fabricated by vacuum sintering. The influence of SiC nanoparticles on …

This study aims to correlate thermal parameters in the directional solidification of Al-10wt%
Si-5wt% Cu alloy with the resulting microstructure and, in addition, with hardness and …

In order to solve the problem of cracking of ZTAP (Zirconia toughened alumina ceramic
particles) reinforced HCCI (high chromium cast iron) matrix composites, the quenching …

Forging is a bulk deformation process in metal working commonly employed in the
manufacture of metallic materials prostheses. Depending on the compressive loads applied …

Tungsten forms with carbon several chemical compounds (see also section C–W in Table I-
2.13): tungsten monocarbide δ-WC1±x phase (hexagonal structured), having almost …

Metais-duros à base de carboneto de nióbio (cermets), tendo níquel como ligante, podem
substituir os tradicionais WC-Co, à base de carboneto de tungstênio, que tem normalmente …

The human activity of walk and run leads to the join femur-hip a cyclic load and a fluctuant
stress and strain that is able to produce cracks or fracture due to fatigue that is a progressive …

Devido ao crescimento das demandas de ferramentas de corte para aplicações de
usinagem e à dependência da importação das matérias-primas críticas para fabricação de …