The corrosion of mild steels by liquid aluminum is an intractable issue in aluminum industry.
This review aims to provide an overview of the corrosion behavior of mild steels in the static …

Abstract A novel FeB-10 wt.% Mo-12 wt.% Al 0.25 FeNiCoCr (denoted as FeB-10 Mo-12
HEA) cermet and coating were prepared by spark plasma sintering (SPS) and an activated …

The influence of silicon on the corrosion resistance of Fe-Cr-Si alloys in molten aluminum
and related mechanisms were systematically studied in this paper. Cr-Si-rich ribbon …

In this work, in situ nanoparticles (TiB 2 and TiC) can be demonstrated to induce significant
improvement in the oxidation resistance of Fe-12 wt.% Cr-3.5 wt.% B alloys. To unravel the …

The corrosion behavior of ferrous alloys (JDF alloys and DIN1. 2888) in dynamic Al melts at
750℃ has been investigated experimentally and theoretically. Results show that the …

The influence of thermal diffusion treatment on the microstructure and corrosion behavior of
hot-dipped Al coated Fe− Cr− Si− B cast steel in a 5 wt.% NaCl solution was studied. The …

In this work, the as-cast directionally solidified (DS) Fe–B alloys with various Si contents and
different boride orientation were designed and fabricated, and the as-cast microstructures …

The periodic layered structures (PLSs) have been confirmed to be formed as the Fe–Cr–B
cast steels containing about 3.0 wt% B were dipped into Al melt. However, there was no …

In this work, a significant enhancement of corrosion resistance of Fe-B materials in liquid Al
(750° C), with a corrosion rate one order of magnitude lower than that of H13 die steel, has …

During the hot dip aluminum plating process, components such as sinking rollers, pulling
rollers, and guide plates will come into long-term contact with high-temperature liquid …