Polymer electrolyte membrane fuel cells are promising power sources because of their
advantage such as high efficiency, zero emission and low operating temperature. Water …

Catalyst-coated membranes (CCMs) have gained popularity among membrane electrode
assembly (MEA) fabricators for their abilities and advantages compared with those of other …

An ultrathin layer of hydrophilic titanium dioxide (TiO 2) is coated on the gas diffusion layer
(GDL) to enhance the performance of a proton exchange membrane fuel cell (PEMFC) at …

A tradeoff between the low humidity and the high performance remains a key challenge for
the proton exchange membrane fuel cell (PEMFC). In this work, a novel self-humidifying gas …

For high efficiency and long durability of proton exchange membrane fuel cells (PEMFCs),
polymer electrolyte membranes should be kept wet. Reactant gases should be humidified …

A proton exchange membrane fuel cell operating with no external humidification support
was successfully reported using a novel silica composite layer on the anode side (Pt/C/SiO …

In this work, membrane electrode assemblies (MEAs) prepared by catalyst coating
membrane (CCM) method are investigated for reduced platinum (Pt) loading and improved …

In this study, a porous hydrophilic water transport plate (WTP) has been employed as a
bipolar plate to improve water management in proton exchange membrane fuel cells …

A novel enhanced membrane electrode assembly (MEA) was successfully developed by
incorporating a phosphoric acid (PA)-loaded Schiff base network (SNW)-type covalent …

In order to simplify the system configuration and downsize the volume, a proton exchange
membrane fuel cell (PEMFC) needs to be operated in a self-humidified mode without any …