Different approaches to the investigation and testing of the Ni-based self-fluxing alloy coatings—A review. Part 1: General facts, wear and corrosion investigations
The main aim of this two-part article is to present and arrange the collected important
information on widely applicable Ni-based self-fluxing alloy coatings and to point to the …
information on widely applicable Ni-based self-fluxing alloy coatings and to point to the …
Wet abrasive wear behavior of WC-based cermet coatings prepared by HVOF spraying
L Qiao, Y Wu, S Hong, W Long, J Cheng - Ceramics International, 2021 - Elsevier
In this study, three kinds of WC-based cermet coatings including WC–CoCr coating, WC–Ni
coating and WC–Cr 3 C 2–Ni coating were prepared by the high-velocity oxygen-fuel …
coating and WC–Cr 3 C 2–Ni coating were prepared by the high-velocity oxygen-fuel …
High corrosion and wear resistance of Al-based amorphous metallic coating synthesized by HVAF spraying
M Gao, W Lu, B Yang, S Zhang, J Wang - Journal of Alloys and Compounds, 2018 - Elsevier
A uniform and dense Al-based amorphous metallic coating was deposited on AA 2024
substrate by high velocity air fuel (HVAF) spraying. The Al 86 Ni 6 Y 4.5 Co 2 La 1.5 alloy …
substrate by high velocity air fuel (HVAF) spraying. The Al 86 Ni 6 Y 4.5 Co 2 La 1.5 alloy …
Microstructure and mechanical characterization of NiCrBSi alloy and NiCrBSi-WC composite coatings produced by flame spraying
R Rachidi, B El Kihel, F Delaunois - Materials Science and Engineering: B, 2019 - Elsevier
In this work, an experimental study is conducted on the microstructure and mechanical
properties of NiCrBSi and NiCrBSi reinforced with WC coatings, produced onto mild steel …
properties of NiCrBSi and NiCrBSi reinforced with WC coatings, produced onto mild steel …
Plasma sprayed CoNiCrMoNb (BSi) high-entropy amorphous alloy coating: The effect of spraying power on microstructure, mechanical and tribological properties
X Tao, Z Zhang, B Zhang, S Zhu, Y Fan… - Materials Chemistry and …, 2024 - Elsevier
Plasma spraying was used to fabricate the CoNiCrMoNb (BSi) high-entropy amorphous
alloy (HEAA) coatings. The microstructure, mechanical, and tribological properties of these …
alloy (HEAA) coatings. The microstructure, mechanical, and tribological properties of these …
Improvement of wear resistance of Hastelloy C-276 through laser surface melting
The Hastelloy C-276 was laser surface treated in argon atmosphere to improve the
tribological properties. The influence of laser power and scan speed on the metallurgical …
tribological properties. The influence of laser power and scan speed on the metallurgical …
Role of Mo on tribological properties of atmospheric plasma-sprayed Mo-NiCrBSi composite coatings under dry and oil-lubricated conditions
C Zhang, L Liu, H Xu, J Xiao, G Zhang… - Journal of Alloys and …, 2017 - Elsevier
NiCrBSi is a material widely used for preparing wear-resistant coatings. In order to study the
role of molybdenum (Mo) on tribological performance under dry and oil-lubricated …
role of molybdenum (Mo) on tribological performance under dry and oil-lubricated …
Developing partially oxidized NiCr coatings using the combined flame spray and plasma spray process for improved wear behaviour at high temperature
The powders of NiCrBSiFe and NiCr are partially oxidized using a flame spray process and
are deposited on MDN321 steel substrate using a plasma spray process. The effect of partial …
are deposited on MDN321 steel substrate using a plasma spray process. The effect of partial …
Microstructure and Wear Resistance of Amorphous FeMnCrNiBNb Coating Prepared by High-Speed Arc Spraying
J Liu, J Lin, M Kang, JN Ndumia - Journal of Thermal Spray Technology, 2023 - Springer
A novel Fe-based amorphous coating has been prepared on a 17CrNiMo6 substrate by high-
speed arc spraying (HVAS). Using an orthogonal experimental design, the spray parameters …
speed arc spraying (HVAS). Using an orthogonal experimental design, the spray parameters …
Synthesis of electric discharge alloyed nickel–tungsten coating on tool steel and its tribological studies
The present study examines the method of depositing nickel and tungsten on die steel
surface by means of dispersing these elements in dielectric fluid in an electrical discharge …
surface by means of dispersing these elements in dielectric fluid in an electrical discharge …