The behavior of hot deformed flow curves in a 9Cr-1Mo steel have been analysed using
constitutive and artificial neural network (ANN) approaches. At each temperature (850° C …

The plastic deformation occurs in steels during metal forming processing such as rolling,
forging, high-pressure torsion, etc. which modify mechanical properties of materials through …

Optimizing hot workability and processing parameters of the difficult-to-work powder
metallurgy (P/M) superalloy is critical to obtain a desired component through thermo …

Представлен обзор публикаций в области исследования процессов деформации
алюминий-литиевых сплавов, применяемых в конструкциях изделий авиационной и …

Abstract 40CrNi steel is a low alloy steel with medium hardenability and has been widely
used in the manufacturing of crankshafts, wind turbine forgings, etc. As forging is usually …

This study aims to find out the effect of welding heat inputs on microstructure and
mechanical properties relationship of naval high strength steel. The physical weld thermal …

The microstructure of forged products significantly impacts their properties, and defects or
carbide distribution are not visible to the naked eye. Isothermal compression tests on M50 …

This study performed high-temperature compression tests at the temperature 900 to 1200° C
and strain rate 0.01 to 10 s− 1 to characterize the high-temperature deformation behavior of …

In the present investigation, the plastic flow curves and work softening behaviour of a dual
phase Fe–Cr–Ni alloy during hot deformation (low to intermediate temperature range, 948 K …

To obtain flow behavior and workability of 7055 aluminium alloy during hot deformation, hot
compression tests at different temperatures and strain rates are conducted. True stress …