[HTML][HTML] Orientation engineering of magnesium alloy: A review
Mg and its alloys have garnered significant attention due to their exceptional properties,
including low density, good damping capacity, biocompatibility, recyclability, and high …
including low density, good damping capacity, biocompatibility, recyclability, and high …
[HTML][HTML] Ultrafine-grained Mg alloy: preparation, properties, design strategy
As the lightest metal structural materials, Mg alloys have great application potential in
transportation, aerospace, and biomedicine. However, the further application is hindered by …
transportation, aerospace, and biomedicine. However, the further application is hindered by …
Accurate determination of active slip systems for improved geometrical criteria of basal-to-basal slip transfer at grain boundaries in pure Mg
Basal-to-basal slip transfer across grain boundaries was analyzed through the combination
of slip trace analysis and electron back-scatterer diffraction in weakly-textured pure Mg …
of slip trace analysis and electron back-scatterer diffraction in weakly-textured pure Mg …
Application of machine learning to assess the influence of microstructure on twin nucleation in Mg alloys
Twin nucleation in textured Mg alloys was studied by means of electron back-scattered
diffraction in samples deformed in tension along different orientations in more than 3000 …
diffraction in samples deformed in tension along different orientations in more than 3000 …
Effects of dynamic recrystallization mechanisms on texture evolution in Mg-Gd-Y-Zr-Ag alloy during hot compression
In this paper, effects of thermal mechanical parameters on the flow behaviors and
microstructure evolution of Mg-7.5 Gd-1.5 Y-0.4 Zr-0.5 Ag (wt%) alloy were analyzed by the …
microstructure evolution of Mg-7.5 Gd-1.5 Y-0.4 Zr-0.5 Ag (wt%) alloy were analyzed by the …
Development of high strength-ductility Mg-Er extruded alloys by micro-alloying with Mn
This work systematically investigated the influence of the micro-Mn addition on the
microstructures and mechanical properties of Mg-Er alloys. To investigate their deformation …
microstructures and mechanical properties of Mg-Er alloys. To investigate their deformation …
Revealing the effect of misorientation on the deformation behavior of a Mg-Y alloy from the perspective of local strain
The addition of rare earth (RE) elements in magnesium alloys may significantly enhance the
ductility of magnesium alloys, which is generally attributed to the decrease of stacking fault …
ductility of magnesium alloys, which is generally attributed to the decrease of stacking fault …
Improvement of severe plastic deformation realized by several passes rotary swaging in the microstructure and properties of Mg-0.6 Mn-0.5 Al-0.5 Zn-0.4 Ca alloy
H Chen, Y Yang, F Hu, X Liu, F Kong, X Cui… - Materials Science and …, 2023 - Elsevier
The industrial applications of Mg alloys are greatly limited by their trade-off of high strength
and ductility. In this work, conventional extrusion and rotary swaging (RS) were applied to …
and ductility. In this work, conventional extrusion and rotary swaging (RS) were applied to …
[HTML][HTML] Deformation mechanisms of dual-textured Mg-6.5 Zn alloy with limited tension-compression yield asymmetry
A dual-textured wrought Mg-6.5 Zn (wt.%) alloy with limited yield asymmetry (compressive
yield strength/tensile yield strength: 0.90) is reported. Approximately 80% of the grains …
yield strength/tensile yield strength: 0.90) is reported. Approximately 80% of the grains …
[HTML][HTML] Designing Mg alloys with high strength and ductility by reducing the strength difference between the basal and non-basal slips
The additions of alloying elements can significantly improve the mechanical properties of
magnesium (Mg) alloys, mainly due to the fact that their additions change the critical shear …
magnesium (Mg) alloys, mainly due to the fact that their additions change the critical shear …