In this work, the effect of copper addition on NiMo coating is evaluated in regard to the
hydrogen evolution reaction (HER). NiMo and NiMo–NiCu composites are prepared by a …

The aim of this study was to evaluate the effect of Mo content in Ni-Mo electroplated coatings
on the structure and corrosion behavior of the obtained coatings in chloride mediums …

The electrodeposition of the binary Ni–Mo alloys was investigated using different molar
ratios of Ni: Mo, in a sodium citrate electrolyte at pH 4.0. Cyclic voltammetry was performed …

Ni–Cu alloy coatings are well-known for their favourable corrosion resistance. However,
further improvement in their corrosion resistance through incorporation of reinforcing agents …

Ni–Co coatings were produced on Cu substrates by electrodeposition from electrolytes with
different pH values and different Co 2+ concentration. The current efficiency increases from …

Abstract Nanocrystalline Ni–Co alloy coatings containing 0–45 wt% Co were
electrodeposited using horizontal electrodes in a modified Watts bath. Different techniques …

Electrocatalysts for water splitting have been widely explored among recent years. In this
study, nickel–selenium–copper (Ni–Se–Cu) coating was synthesized on nickel foam through …

In this study, we synthesized thin films of semiconductor Cu 2 CoSnS 4 (CCTS). We
investigated the mechanism of CCTS electrodeposition precursor onto fluorine-doped tin …

The present study elucidates the electrodeposition of an Agsingle bondCu bimetallic
composite coating on a copper substrate from a thiourea-based (TU, CH 4 N 2 S) …

This paper reports on a study of the electrodeposition of Ni-Mo and Fe-Mo alloys on Pt
electrodes in a sodium citrate solution at pH 4.0. The alloys were subjected to cyclic …