Recent progress in surface modification of metals coated by plasma electrolytic oxidation: Principle, structure, and performance

M Kaseem, S Fatimah, N Nashrah, YG Ko - Progress in materials science, 2021 - Elsevier
In recent years, considerable research has long been devoted to the development of
metallic materials with excellent surface properties through various surface modification …

[HTML][HTML] A review on the fatigue performance of micro-arc oxidation coated Al alloys with micro-defects and residual stress

W Dai, C Zhang, H Yue, Q Li, C Guo, J Zhang… - Journal of Materials …, 2023 - Elsevier
Unavoidable issues of micro-arc oxidation (MAO) coated Al alloys are the micro-defects and
residual stress generation. Some scientists have reported the effects of micro-defects and …

Fast formation of a black inner α‐Al2O3 layer doped with CuO on Al–Cu–Li alloy by soft sparking PEO process

X He, T Feng, Y Cheng, P Hu, Z Le… - Journal of the …, 2023 - Wiley Online Library
Forming high‐temperature α‐Al2O3 phase under soft sparking is an intriguing phenomenon
in plasma electrolytic oxidation (PEO) of Al alloys, which contradicts the low energy input of …

[HTML][HTML] NaF assisted preparation and the improved corrosion resistance of high content ZnO doped plasma electrolytic oxidation coating on AZ31B alloy

C Yang, J Huang, S Cui, R Fu, L Sheng, D Xu… - Journal of Magnesium …, 2024 - Elsevier
In the present research, the NaF assisted plasma electrolytic oxidation (PEO) is designed to
fabricate the high-content ZnO nanoparticles doped coating on AZ31B alloy. The …

In-situ growth of mullite whiskers and their effect on the microstructure and properties of porous mullite ceramics with an open/closed pore structure

Z Yang, F Yang, S Zhao, K Li, J Chen, Z Fei… - Journal of the European …, 2021 - Elsevier
Porous mullite ceramics with an open/closed pore structure were prepared by protein
foaming method combined with fly ash hollow spheres. Both the open porosity and total …

Pore structure optimization of MoS2/Al2O3 self-lubricating ceramic coating for improving corrosion resistance

Y Tuo, Z Yang, Z Guo, Y Chen, J Hao, Q Zhao, Y Kang… - Vacuum, 2023 - Elsevier
As light alloys have inherent friction and corrosion problems, an appropriate ceramic coating
is often needed to resolve these problems in tribological and corrosive environments. In this …

[HTML][HTML] Hard anodizing and plasma electrolytic oxidation of an additively manufactured Al-Si alloy

H Mora-Sanchez, R Del Olmo, J Rams, B Torres… - Surface and Coatings …, 2021 - Elsevier
Abstract Plasma Electrolytic Oxidation (PEO) and Hard Anodizing (HA) coatings are
investigated on an Additively Manufactured (AM) Al10Si1Mg alloy obtained via Direct Metal …

[HTML][HTML] Energy consumption, wear and corrosion of PEO coatings on preanodized Al alloy: The influence of current and frequency

M Mohedano, E Lopez, B Mingo, S Moon… - Journal of Materials …, 2022 - Elsevier
The influence of current and frequency on energy consumption of plasma electrolytic
oxidation (PEO) of a commercial aluminium alloy pre-treated by conventional anodizing in …

Improvement of oxide layers formed by plasma electrolytic oxidation on cast AlSi alloy by incorporating TiC nanoparticles

AV Polunin, AO Cheretaeva, ED Borgardt… - Surface and Coatings …, 2021 - Elsevier
The effect of titanium carbide nanoparticles (TiC NPs) on the structure, chemical and phase
composition of the oxide layers obtained by plasma electrolytic oxidation (PEO) on the …

A new strategy to prepare alumina-zirconia composite or multilayered coatings by combining cold-spray deposition and plasma electrolytic oxidation

J Martin, A Maizeray, CDS Tousch, G Marcos… - Materials Today …, 2023 - Elsevier
In the present study, the feasibility of the elaboration of alumina (Al 2 O 3)-zirconia (ZrO 2)
composite coatings on steel was explored by combining cold-spray deposition and plasma …