This study presents a new variant of arc-directed energy deposition (Arc-DED) called bypass
wire Arc-DED, in which a bypass wire is fed into the arc and separates part of currents from …

Additive manufacturing based on robotic welding is used for the manufacture of metal parts
by applying an arc as a heat source and wire as feedstock. The process is known as wire arc …

This research proposes a novel hybrid cold metal transfer (CMT) and tandem Pulsed gas
metal arc welding (P-GMAW) process for narrow gap welding (NGW) of high strength low …

One of the main concerns in the early stages of manufacturing flat units of shipbuilding is to
ensure the quality of the joints throughout the structure. The flat units are constituted by butt …

Current waveform control method was of great significance to welding quality of GMAW
process. In order to study the influence of a novel control method of ultrasonic-frequency …

The tandem narrow-gap gas metal arc welding (NG-GMAW) is an advanced high efficient
technology for joining thick section metals. However, the common defects such as lack-of …

The tandem narrow-gap gas metal arc welding was adopted in this study. The effects of
interwire angle on the welding process stability and arc behavior were investigated. With the …

To reduce manufacturing costs, energy companies aim to maximize the deposition rate
during welding operations by increasing the interpass temperature (IT), thereby minimizing …

To reduce manufacturing costs, manufacturers may perform welding with a high interpass
temperature (IT), which can reduce the welding idle time and increase the productivity of …

The visual measurement system was established to investigate the fluid flow during high-
speed gas metal arc welding. The two-dimensional fluid flow velocity on weld pool surface …