Slagging and fouling risks from solid fuel combustion in a boiler can be determined using an
experimental investigation, ash observation, or prediction indices based on theoretical …

In the last decades, the demand for alternative fuels has been growing due to carbon-neutral
regulations. Co-firing coal with biomass potentially reduces greenhouse gases emission by …

This study focuses on optimizing the composition and firing temperature of porcelain tiles
using statistical analysis techniques. A full factorial design, including model adequacy …

Based on the chemical composition and secondary diagenetic property, one type of natural
aluminosilicate was proposed as an immobilization matrix for the simulated An 3+ waste (Nd …

In this work, a translucent ceramic was developed based on a porcelain stoneware paste
modified by the addition of a frit to promote translucency. Six compositions were defined …

Raw materials with different technological properties found in the same geological region
can constitute a ceramic formulation upon proper mixing. This study aims to demonstrate the …

This paper begins with an introduction to porcelain tiles. A review of the major scientific and
technological features of mullite-based porcelain tiles (MPTs) and anorthite-based porcelain …

Clays are raw materials with properties that are necessary for the manufacture of ceramic
tiles. The characteristics of clay ceramic raw materials may vary within the same mineral …

Large-format ceramic tiles are prone to dimensional variation that is detected as warping,
which is often due to the appearance of a defect called delayed curvature. This problem is …

In the field of ceramics, mullite has drawn plenty of attention due to its low thermal expansion
and thermal conductivity as well as its high chemical stability and creep resistance. This …