Solar selective absorbing coatings directly harvest solar energy in the form of heat. The
higher temperatures are required to drive higher power-cycle efficiencies in favor of lower …

Solar selective absorber coatings, consisting in a TiAlN x/TiAlN y tandem absorber with low
(metallic-like) and high (semiconductor-like) nitrogen content, and an Al 2 O 3 antireflective …

A new nanostructured TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber has been
designed for high-temperature solar thermal power applications. The first three layers in this …

Selective absorbers for CSP plants to suppress thermal losses and to increase the efficiency
is a promising topic and strong scientific efforts have been spent on how to design and …

Abstract A novel WAlN/WAlON/Al 2 O 3 coating was successfully deposited on stainless
steel (SS) substrate using reactive DC and RF magnetron sputtering. Excellent spectrally …

In the field of concentrating solar power (CSP) technologies, multilayer absorber coatings
are widely being investigated. The spectral properties of selective coatings can be tailored …

The contribution of each component of a power generation plant to the levelized cost of
energy (LCOE) can be estimated and used to increase the power output while reducing …

Abstract Spectrally selective TiAlN/TiAlSiN/Si 3 N 4 multilayer coatings were deposited on
stainless steel (SS) plate using a reactive direct current magnetron sputtering technique. In …

Abstract Cr 2 O 3/Cr/Cr 2 O 3 multilayered selective solar absorber coating was deposited
onto stainless steel substrates using electron beam vacuum evaporation at room …

In this study, a vertical shaft is coated using silver nanowires (AgNWs) together with reduced
graphene oxide (rGO) via the supersonic spray-coating technique to enhance the absorption …